Supermicro SYS-8026B-6RF 2U Rackmount

Call for price

In stock

SKU

SYS-8026B-6RF

Key Features:
• Quad Intel® Xeon® processor 7500 series (8-Core) or new gen.
Intel® Xeon® processors E7-4800 family (10-Core), with QPI up
to 6.4 GT/s
• Support 1TB DDR3 ECC Reg. DIMM
• Auto-switch for: 2 (x16) PCI-E 2.0 or
1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
4 (x8) PCI-E 2.0 slots (in low profile)
• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• 6 Total Hot-swap Drive Bays:
6x SAS/SATA Drives Support
• 1400W Gold Level Redundant High-efficiency Power Supplies
• LSI 2108 8-Port 6Gbps SAS Controller built-in; Hardware RAID 0,
1, 5, 6,10, 50 support
•Integrated IPMI 2.0 with Dedicated LAN

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-8026B-6RF 2U Rackmount

Supermicro SYS-8026B-6RF 2U Rackmount Barebone with Redundant 1400W high-efficiency power supply, Intel® 7500 (Boxboro-EX) chipset, 6x 3.5" Hot-swap SAS/SATA Drive
Bays using Supermicro Super X8QB6-F motherboard and CSE-828TQ-R1400LPB Chassis.

Product SKU
SYS-8026B-6RF	SuperServer 8026B-6RF (Black)

Motherboard
	Super X8QB6-F

Processor/Cache
CPU	Quad 1567-pin LGA Sockets Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below: Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
QPI	up to 6.4 GT/s

System Memory
Memory Capacity	32x 240-pin DIMM sockets Supports up to 1024 GB DDR3 ECC Registered memory at 1066/978/800MHz speed Memory Mirroring supported
Memory Type	1333* / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 32GB**
Memory Voltage	1.5 V, 1.35V**
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices
Chipset	Intel® 7500 (Boxboro-EX) chipset ICH10R
SAS	LSI 6Gbps SAS 2108 controller RAID 0, 1, 5, 6, 10, 50 support BBU (battery backup) extension kit (optional)
SATA	Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® 82576 Dual-Port Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Matrox G200eW 16 MB DDR2
Super I/O	Winbond 83527HB chip

Input/Output
LAN	3x RJ45 LAN ports
USB	2x USB rear ports 2x USB internal headers (3 ports) Total 5 USB 2.0 Compliant
VGA	1x VGA port
Serial Port / Header	1 Fast UART 16550 serial port 1 Fast UART 16550 serial header

System Bios
Bios Type	32Mb SPI Flash EEPROM with AMI® BIOS
Bios Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support

System Bios

Bios Type

32Mb SPI Flash EEPROM with AMI® BIOS

Bios Features

Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support

Chassis
Form Factor	2U Rackmount
Model	CSE-828TQ-R1400LPB

Dimension and Weight
Height	3.5" (89mm)
Width	17.2" (437mm)
Depth	27.9" (709mm)
Weight	66.5 lbs (30.2 kg)
Available Color	Black

Front Panel
Buttons	Power On/Off button System Reset button
LED	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED

Expansionn Slot (Low-Profile)
PCI-Express	Auto-switch for 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots

Drive Bays
Hot-swap	6x 3.5" Hot-swap SAS/SATA Drives Supported

Backplane
	SAS/SATA HDD Backplane (SAS support requires optional SAS controller)

Peripheral Drives
DVD-ROM	Slim 8x DVD, 24x CD, DVD-ROM (optional)

System Cooling
Fans	3x 80mm heavy-duty fans with optimal fan speed control; 1x Air shroud

Power Supply
	Redundant 1400W high-efficiency power supply with PMBus
AC Input	1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output +5V standby	6 Amp
DC Output +12V	100 Amp @ 100-140V 117 Amp @ 180-240V
With Power Distributor	+5V: 30 Amp +3.3V: 25 Amp -12V: 0.6 Amp
Cerification	Gold Certified

PC Health Monitoring
CPU	Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN	10x 4-pin fan headers with tachometer status monitoring Low noise fan speed control mode
Temperature	Monitoring for CPU and system environment Thermal Control for 10x fan connectors
Other Features	Chassis intrusion detection

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)