Supermicro 1U Rackmount SuperServer SYS-8014T-T
Key Features:
• Quad Dual-Core Intel® Xeon® Processor 7100 Series Support, up to 3.0 GHz,
800 MHz FSB (CPUs must be 95W or less)
• Up to 64GB ECC DDR2 400 SDRAM
• 1 x8 (in x16) PCI-Express Slot
• Dual Intel® 82571 PCI-e Gigabit Ethernet Controllers
• 3 Total Hot-swap Drive Bays: 2x SATA Drive Support 1x Spare Drive Bay
• 1000W High-efficiency Power Supply
• IPMI 2.0 Support
Supermicro SYS-8014T-T / SYS-8014T-TB 1U Rackmount with Intel® E8501 chipset, 2x 3.5" Hot-swap SATA Drives Supported, using
Super X6QTE+ and SC818TQ-1000 Rackmount
Chassis
Product SKU |
|
|---|---|
| SYS-8014T-T | • SuperServer 8014T-T (Beige) |
| SYS-8014T-TB | • SuperServer 8014T-TB (Black) |
Motherboard |
|
|---|---|
| Super X6QTE+ | |
Processor/Cache |
|
|---|---|
| CPU | • Quad 604-pin FC-mPGA4 Sockets |
| System Bus | • 800 MHz system bus |
| OS Software | • Supports 64-bit Operating Systems • Supports 32-bit Operating Systems |
System Memory |
|
|---|---|
| Memory Capacity |
• Sixteen 240-pin DIMM sockets • Supports up to 64GB ECC DDR2 400MHz memory • Dual channel memory bus • Memory must be populated in pairs and all be of same type • Single-rank modules are recommended for 6+ DIMM support |
| Memory Type | • DDR2 400MHz registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | • 1.8V only |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 Single Device Data Correction (SDDC) |
On-Board Devices |
|
|---|---|
| Chipset | • Intel® E8501 chipset |
| SATA | • ICH5R SATA Controller • RAID 0, 1, JBOD support |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • (Optional: AOC-IPMI20-E) |
| Network Controllers | • Dual Intel® 82571 Single Port PCI-e Gigabit Controllers • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | • ATI ES1000 SVGA PCI video controller with 16 MB of video memory |
| Super I/O | • National 87427 chip |
Input/Output |
|
|---|---|
| Serial ATA | • Two Serial ATA ports • Two SATA hard drives supported |
| IDE | • Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | • 1 Floppy controller; 1.44 MB |
| LAN | • 2x RJ45 LAN ports |
| USB | • 2x USB rear ports • 2x USB internal headers • USB 2.0 Compliant / 1.1 Compliant |
| VGA | • 1x VGA port |
| Keyboard/Mouse | • PS/2 keyboard and mouse ports |
| Serial Port/Header | • 1 Fast UART 16550 serial port |
System Bios |
|
|---|---|
| Bios Type | • 8Mb Flash EEPROM with Phoenix® BIOS |
| Bios Features | • Plug and Play (PnP) |
Chassis |
|
|---|---|
| Form Factor | • 1U Rackmount |
| Model | • SC818TQ-1000 |
Dimension and Weight |
|
|---|---|
| Height | • 1.7" (43mm) |
| Width | • 17.2" (437mm) |
| Depth | • 27.75" (705mm) |
| Weight | • 43 lbs (19.5 kg) |
| Available Color | • Black, Beige |
Front Panel |
|
|---|---|
| Buttons | • Power On/Off button |
| LEDs | • Power Status LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED |
Expansion Slot |
|
|---|---|
| PCI-Express | • 1 x8 (in x16) PCI-e Slot |
Drive Bays |
|
|---|---|
| Hot Swap | • 2x 3.5" Hot-swap SATA Drives Supported |
SATA BackPlane |
|
|---|---|
| • 1U SATA / SAS Backplane |
|
Peripheral Drives |
|
|---|---|
| DVD-ROM | • Slim 8x DVD, 24x CD, DVD-ROM drive |
System Cooling |
|
|---|---|
| Fans | • 6x heavy-duty counter-rotating fans with optimal fan speed control |
| Shroud | • 1x Air Shroud for CPU |
Power Supply |
|
|---|---|
| 1000W AC-DC high-efficiency power supply w/ PFC + PDB | |
| AC Voltage | • 100 - 240V, 50 - 60Hz, 15 - 7Amp |
| +5V stand by | • 4 Amp |
| +12V | • 83 Amp |
| With Power Distributor |
• +5V: 20 Amp • +3.3V: 20 Amp • -12V: 0.6 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | • Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby • CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V |
| FAN | • Total of nine 4-pin and four 3-pin fan headers • 9x fans with status monitoring • Status monitor for speed control • Status monitor for on/off control • Support for 3-pins (w/ speed control) • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 6x Fan Connectors • I2C Temperature Sensing Logic • Thermal Monitor 2 support |
| LED | • CPU Overheat LED |
| Other Features | • Chassis intrusion detection • Chassis intrusion header • SDDC |
Operating Environment |
|
|---|---|
| Environmental Specs | • Operating Temperature: 10° to 35° C (50° to 95°F)
|