Supermicro SYS-6027R-72RFTP+ 2U Rackmount Server Barebone
• Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and
E5-2600 v2 family€
• Up to 1.5TB ECC DDR3, up to 1866MHz; 24x DIMM slots
• Riser card support: Left side - 1 (x16) & 2 (x8) PCI-E 3.0 Right side -
2 (x8) PCI-E 3.0
• Intel® 82599 Dual port 10G SFP+ & Intel® i350 Dual port GbE controllers
• 10x 3.5" Hot-swap SAS/SATA HDD Bays; 8x SAS2 ports support via
LSI 2208; 2x ports SATA3 via Intel C602J
• 920W Redundant Power Supplies Platinum Level (94%)
ports support via LSI 2208; 2x ports SATA3 via Intel C602J using Supermicro Super X9DRW-7TPF+ Server Motherboard and CSE-829BTQ-R920WB 2U Rackmount Chassis.
Product SKU |
|
---|---|
SYS-6027R-72RFTP+ | SuperServer 6027R-72RFTP+ (Black) |
Motherboard |
|
---|---|
Super X9DRW-7TPF+ |
Processor/Cache |
|
---|---|
CPU | Dual Socket R (LGA 2011) |
Cache | Up to 30MB |
System Bus | QPI up to 8 GT/s |
Note | € BIOS version 3.0 or above is required |
System Memory |
|
---|---|
Memory Capacity |
24x 240-pin DDR3 DIMM slots Up to 1.5TB DDR3 ECC LRDIMM Up to 768GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM) |
Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices |
|
---|---|
Chipset | Intel® C602J chipset |
SATA | Via Cable for SATA controller SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1 |
SAS | SAS2 from LSI 2208 (1GB cache) HW RAID 0, 1, 5, 6, 10, 50, 60 support Supports up to 16 drives |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
Network Controllers | Intel® 82599 Dual Port 10G SFP+ |
Graphics | Matrox G200eW |
Input/Output |
|
---|---|
Serial ATA | 2x SATA 3.0 ports (6Gbps) |
SAS | 8x SAS2 ports (6Gbps) |
LAN |
2x SFP+ 10GbE LAN ports 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 5x USB 2.0 ports total (2x rear + 2x via header + 1x Type A) |
VGA | 1x VGA port |
Serial Port/Header | 1x Fast UART 16550 port / 1 Header
|
Chassis |
|
---|---|
Form Factor | 2U Rackmount |
Model | CSE-829BTQ-R920WB |
Dimension and Weight |
|
---|---|
Height | 3.5" (89mm) |
Width | 17.2" (437mm) |
Depth | 27.75" (705mm) |
Weight | 52 lbs (23.6kg) |
Available Color | Black |
Front Panel |
|
---|---|
Buttons |
Power On/Off button System Reset button |
LED | Power status LED HDD activity LED 2x Network activity LEDs System Overheat LED Power fail LED |
Expansion Slot (via riser card) |
|
---|---|
PCI-Express | Left: 1 PCI-E 3.0 (x16), 2 PCI-E 3.0 (x8) Full-height (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
Drive Bays |
|
---|---|
Hot-Swaps | 10x 3.5" Hot-swap SAS / SATA HDD trays (connected to onboard storage controller - 2x SATA3, 8x SAS) |
Peripheral Drives |
|
---|---|
DVD-ROM | Slim DVD-ROM drive (optional) |
Backplane |
|
---|---|
1x SAS2 / SATA backplane |
System Cooling |
|
---|---|
Fans | 4x 8cm heavy duty PWM fans |
Power Supply with Power Distributor |
|
---|---|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | |
AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
DC Ouput | 4 Amp @ +5V standby 75 Amp @ +12V |
Certification | Platinum Certified |
System Bios |
|
---|---|
Bios Type | 128Mb SPI Flash EEPROM with AMI BIOS |
Bios Features | Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI |
Operating Environment / Compliance |
|
---|---|
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature:
10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |