Supermicro SYS-6026T-URF4+ 2U Rackmount
• Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
• 288GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM /
48GB Unbuffered DIMM
• Left: (Full-height / Full-length) 1 (x8) PCI-E 2.0, 2 (x4) PCI-E 2.0
and UIO slot
• Right: 2 (x4) PCI-E 2.0 slots
• 2x Intel® 82576 Dual-port Gigabit Ethernet Controllers (4 ports)
• 8x 3.5" Hot-swap Drives Trays
• 920W High-efficiency Platinum Level Redundant Power Supply
• Integrated IPMI 2.0 with Dedicated LAN
Hot-swap drive bays using Supermicro Super X8DTU-LN4F+ Motherboard and CSE-829TQ-R920UB 2U Chassis.
Product SKU |
|
---|---|
SYS-6026T-URF4+ | SuperServer 6026T-URF4+ (Black) |
Motherboard |
|
---|---|
Super X8DTU-LN4F+ |
Processor/Cache |
|
---|---|
CPU | Dual 1366-pin LGA Sockets |
QPI | up to 6.4 GT/s |
System Memory |
|
---|---|
Memory Capacity |
18x 240-pin DIMM slots Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB , 8GB , 16GB |
Memory Voltage | 1.5 V / 1.35 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices |
|
---|---|
Chipset | Intel® 5520 (Tylersburg) chipset ICH10R |
SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
Network Controllers | 2x Intel® 82576 Dual-Port Gigabit Ethernet Controllers (4 ports) |
Graphics | Matrox G200eW |
Super I/O | Winbond 83827HF chip |
Expansion Slot |
|
---|---|
Left Slot | 1 Unversal I/O (UIO) Slot 1 (x8) PCI-E 2.0 slot 2 (x4) PCI-E 2.0 slots |
Right Slot | 2 (x4) PCI-E 2.0 slots |
Input/Output |
|
---|---|
Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
LAN |
4x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 2x USB rear ports 1x USB on-board 5x USB internal headers Total 8 USB 2.0 Compliant |
VGA | 1 VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | 1 Fast UART 16550 serial port |
Chassis |
|
---|---|
Form Factor | 2U Rackmount |
Model | CSE-829TQ-R920UB |
Dimension and Weight |
|
---|---|
Height | 3.5" (89mm) |
Width | 17.25" (438mm) |
Depth | 27.75" (705mm) |
Weight | 55 lbs (24.9kg) |
Available Color | Black |
Front Panel |
|
---|---|
Buttons |
Power On/Off button System Reset button |
LED | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Power fail LED |
Ports | 2x USB Ports |
Drive Bays |
|
---|---|
Hot-Swaps | 8x 3.5" SAS / SATA Hot-swap drive trays |
Peripheral Drives |
|
---|---|
DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM drive |
SAS / SATA Backplane |
|
---|---|
1x 2U SAS / SATA backplane |
System Cooling |
|
---|---|
Fans | 4x 80mm 6300 RPM fans |
Shroud | 1x Air Shroud |
Power Supply with Power Distributor |
|
---|---|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | |
AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
DC Output | 4 Amp @ +5V standby 75 Amp @ +12V |
Certification | Platinum Certified |
PC Health Monitoring |
|
---|---|
CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
FAN | Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control |
Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
Other Features | Chassis intrusion detection Chassis intrusion header |
Operating Environment / Compliance |
|
---|---|
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature:
5°C to 35°C (41°F to 95°F)
|