Supermicro SYS-6026T-NTR+ 2U Rackmount
• Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
• 288GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM /
48GB Unbuffered DIMM
• 2 (x8) PCI-E 2.0 (1 in x16 slot),br> 1 (x4) PCI-E (in x 8 slot),
1x 64-bit 133MHz PCI-X,
2x 64-bit 133/100MHz PCI-X & 1 UIO slot
• Intel® 82576 Dual-port Gigabit Ethernet Controller
• 8x 3.5" Hot-swap Drives Trays 6x SATA Hard Drives Supported
• 720W High-efficiency Gold Level Redundant Power Supply
drive bays using Supermicro Super X8DTN+ Motherboard and CSE-825TQ-R720LPBP-1 2U Chassis.
Product SKU |
|
---|---|
SYS-6026T-NTR+ | SuperServer 6026T-NTR+ (Black) |
Motherboard |
|
---|---|
Super X8DTN+ |
Processor/Cache |
|
---|---|
CPU | Dual 1366-pin LGA Sockets |
QPI | up to 6.4 GT/s |
System Memory |
|
---|---|
Memory Capacity |
18x 240-pin DIMM slots Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB , 8GB , 16GB |
Memory Voltage | 1.5 V / 1.35 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
Note | This board does not support LRDIMM memory. |
On-Board Devices |
|
---|---|
Chipset | Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D |
SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controller |
Graphics | ATI ES1000 controller with 32 MB of video memory |
Super I/O | Winbond 83627HF chip |
Expansion Slot |
|
---|---|
PCI-Express | 2 (x8) PCI-E slots (1 in x16 slot) 1 (x4) PCI-E slot (in x8 slot) |
PCI-X |
1x 64-bit 133MHz PCI-X (3.3V) slots 2x 64-bit 133/100MHz PCI-X (3.3V) slots |
UIO | 1 UIO slot (PCI-E 2.0 x8 slot) |
Input/Output |
|
---|---|
Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
Floppy | 1 Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | 2x USB rear ports 2x USB on-board 2x USB internal headers( 3 ports) 7 total USB ports, 2.0 Compliant |
VGA | 1 VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | 1 Fast UART 16550 serial port
|
Chassis |
|
---|---|
Form Factor | 2U Rackmount |
Model | CSE-825TQ-R720LPBP-1 |
Dimension and Weight |
|
---|---|
Height | 3.5" (89mm) |
Width | 17.25" (438mm) |
Depth | 25.5" (648mm) |
Weight | 55 lbs (24.9kg) |
Available Color | Black |
Front Panel |
|
---|---|
Buttons |
Power On/Off button System Reset button |
LED | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Power fail LED |
Ports | 2x USB Ports |
Drive Bays |
|
---|---|
Hot-Swaps | 8x 3.5"SATA Hot-swap drive trays Supports up to 6x SATA hard drives |
Peripheral Drives |
|
---|---|
DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
SAS / SATA Backplane |
|
---|---|
1x 2U SAS / SATA backplane |
System Cooling |
|
---|---|
Fans | 3x 80mm 6300 RPM fans |
Shroud | 1x Air Shroud |
Power Supply with Power Distributor |
|
---|---|
720W (1+1) Redundant high-efficiency power supply with PMBus | |
AC Input | 100-240 V, 50-60 Hz, 4-9 Amp |
DC Output | 3 Amp @ +5V standby 59 Amp @ +12V |
With Power Distributor |
+5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp |
Certification | Gold Certified |
System Bios |
|
---|---|
Bios Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
Bios Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
PC Health Monitoring |
|
---|---|
CPU | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages. 5-Phase-switching voltage regulator |
FAN | Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control |
Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
Other Features | Chassis intrusion detection Chassis intrusion header |
Operating Environment / Compliance |
|
---|---|
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature:
5°C to 35°C (41°F to 95°F) |