Supermicro SYS-6025W-URB 2U Rackmount
• Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1600 / 1333 /
1066 MHz FSB
• Up to 64GB DDR2 800 / 667 / 533 SDRAM Fully Buffered DIMM
(FB-DIMM)
• 1 Universal I/O (UIO) Slot,
3 (x8) Full-height/length PCI-E,
2 (x8) Low-Profile PCI-E Slots
• Intel® 82575EB Dual-port Gigabit Ethernet Controller
• 8x 3.5" Hot-swap Drives Trays 6x SATA Hard Drives Supported
• 700W High-efficiency Redundant Power Supply
using Supermicro Super X7DWU other board and SC825TQ-R700U 2U Chassis.
Product SKU |
|
---|---|
SYS-6025W-URB | SuperServer 6025W-URB (Black) |
Motherboard |
|
---|---|
Super X7DWU |
Processor/Cache |
|
---|---|
CPU | Dual 771-pin LGA Sockets |
System Bus | 1600 / 1333 / 1066 MHz system bus |
System Memory |
|
---|---|
Memory Capacity |
Eight 240-pin DIMM slots Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Sparing supported |
Memory Type | 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
Memory Voltage | 1.8 V or 1.5 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices |
|
---|---|
Chipset | Intel® 5400 (Seaburg) chipset MCH + ESB2 |
SATA | Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 / 1.5 |
Network Controllers | Intel® 82575EB Dual-Port Gigabit Ethernet Controller |
Graphics | ATI ES1000 controller with 32 MB of video memory |
Super I/O | Winbond 83627HF chip |
Clock Generator | ICS 401 chip |
Input/Output |
|
---|---|
Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
Floppy | 1 Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | 2x USB rear ports 3x USB internal headers Total 5 USB 2.0 Compliant / 1.1 Compliant |
VGA | 1 VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | 1 Fast UART 16550 serial port |
System Bios |
|
---|---|
Bios Type | 16Mb Flash EEPROM with Phoenix® BIOS |
Bios Features | Plug and Play (PnP)
|
Chassis |
|
---|---|
Form Factor | 2U Rackmount |
Model | SC825TQ-R700U |
Dimension and Weight |
|
---|---|
Height | 3.5" (89mm) |
Width | 17.2" (437mm) |
Depth | 25.5" (648mm) |
Weight | 55 lbs (24.9kg) |
Available Color | Silver,Black |
Front Panel |
|
---|---|
Buttons |
Power On/Off button System Reset button |
LED | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Power fail LED |
Ports | 2x USB Ports + DB9 COM Port (optional) |
Expansion Slot |
|
---|---|
Left Side | 1 Universal I/O (UIO) Slot 3 (x8) PCI-E Slots (Full-height / Full-length) |
Right Side | 2 (x8) PCI-E Slots (Low-Profile) |
Drive Bays |
|
---|---|
Hot-Swaps | 8x 3.5"SATA Hot-swap drive trays Supports up to 6x SATA hard drives |
Peripheral Drives |
|
---|---|
DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
Floppy | Slim 1.44MB Floppy Drive (Optional) |
SATA Backplane |
|
---|---|
1x 2U SATA backplane |
System Cooling |
|
---|---|
Fans | 3x 80mm 6300 RPM fans |
Shroud | 1x Air Shroud |
Power Supply |
|
---|---|
700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | |
AC Voltage | 100 - 240V, 60-50Hz, 10 - 4 Amp |
+5V standby | 4 Amp |
+12V | 57 Amp |
With Power
Distributor |
+5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp |
PC Health Monitoring |
|
---|---|
CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
FAN | Total of eight 4-pin fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Support 3-pin fans (w/o speed control) Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PC temperture sensing logic Thermal Monitor 2 (TM2) support PECI |
LED | CPU / System Overheat LED UID / Remote UID |
Other Features | Chassis intrusion detection Chassis intrusion header SDDC |
Operating Environment / Compliance |
|
---|---|
RoHS | RoHS Compliant 5/6, Server Exemption |
Environmental Spec. | Operating Temperature:
5°C to 35°C (41°F to 95°F) |