Supermicro SYS-6025C-URB 2U Rackmount
• Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1333 / 1066 MHz FSB
• Up to 48GB 667/533MHZ DDR2 ECC Register SDRAM
• 1 Universal I/O (UIO) Slot, 3 (x8) Full-height/length PCI-E Expansion Slots
• Intel® 82575EB Dual-port Gigabit Ethernet Controller
• 8x 3.5" Hot-swap Drives Trays, 6x SATA Hard Drives Supported
• 700W High-efficiency Redundant Power Supply
bays using Supermicro Super X7DCU other board and SC825TQ-R700U 2U Chassis.
Product SKU |
|
|---|---|
| SYS-6025C-URB | SuperServer 6025C-URB (Black) |
Motherboard |
|
|---|---|
| Super X7DCU | |
Processor/Cache |
|
|---|---|
| CPU | Dual 771-pin LGA Sockets |
| System Bus | 1333 / 1066 MHz system bus |
| Operating System | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
System Memory |
|
|---|---|
| Memory Capacity |
Six 240-pin DIMM slots Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM Dual channel memory bus Memory must be populated in pairs |
| Memory Type | 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8V only |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices |
|
|---|---|
| Chipset | Intel® 5100 (San Clemente) chipset Intel® ICH9R |
| SATA | Intel ICH9R SB SATAII Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 / 1.5 |
| Network Controllers | Intel® 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT |
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK505 chip |
Input/Output |
|
|---|---|
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| IDE | Single EIDE channel supports up to two UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2 rear + 1 Type A connector + 2 headers (3 Ports) 6 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA | 1 VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port |
System Bios |
|
|---|---|
| Bios Type | 16Mb SPI Flash with Phoenix ® BIOS |
| Bios Features | Plug and Play (PnP)
|
Chassis |
|
|---|---|
| Form Factor | 2U Rackmount |
| Model | SC825TQ-R700U |
Dimension and Weight |
|
|---|---|
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648mm) |
| Weight | 55 lbs (24.9kg) |
| Available Color | Black |
Front Panel |
|
|---|---|
| Buttons |
Power On/Off button System Reset button |
| LED | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Power fail LED |
| Ports | 2x USB Ports + DB9 COM Port (optional) |
Expansion Slot |
|
|---|---|
| Left Side | 1 Universal I/O (UIO) Slot 3 (x8) PCI-E Slots (Full-height / Full-length) |
Drive Bays |
|
|---|---|
| Hot-Swaps | 8x 3.5"SATA Hot-swap drive trays Supports up to 6x SATA hard drives |
Peripheral Drives |
|
|---|---|
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy | Slim 1.44MB Floppy Drive (Optional) |
SATA Backplane |
|
|---|---|
| 1x 2U SATA backplane | |
System Cooling |
|
|---|---|
| Fans | 3x 80mm 6300 RPM fans |
| Shroud | 1x Air Shroud |
Power Supply |
|
|---|---|
| 700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | |
| AC Voltage | 100 - 240V, 60-50Hz, 10 - 4 Amp |
| +5V standby | 4 Amp |
| +12V | 57 Amp |
| With Power
Distributor |
+5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores,VTT, +1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of eight 4-pin fans 8x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/ speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend-state Indicator LED UID |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Spec. | Operating Temperature:
5°C to 35°C (41°F to 95°F) |