Supermicro SYS-5035G-TB MidTower SuperWorkstation

Call for price

In stock

SKU

SYS-5035G-TB

Key Features:
• Intel® Pentium® D, Pentium® 4 Extreme Edition, Pentium 4, Pentium Extreme
   Edition, & Celeron D in LGA775 Package(FSB 1066/800/533)
• Up to 8GB dual channel unbuffered, ECC DDR2 667/533/400 SDRAM
• 1 (x16) & 1 (x1) PCI-Express
   2x 64-bit 133MHz PCI-X
   3x 32-bit 33MHz PCI
• 1x Intel® 82573V (Tekoa) PCI-e Gigabit LAN Port and 8x USB 2.0 ports
• 4 x Hot-swappable SATA Hard Drive Bays
• 450W Power Supply

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperWorkstation SYS-5035G-T / SYS-5035G-TB MidTower

Supermicro SYS-5035G-T / SYS-5035G-TB MidTower SuperWorksation with 450W Power Supply, Intel 955X (Glenwood), 4 x Hot-swappable SATA Hard Drive Bays using Supermicro
Super PDSGE Motherboard

Product SKU
SYS-5035G-T	€¢ SuperServer 5035G-T (Beige)
SYS-5035G-TB	€¢ SuperServer 5035G-TB (Black)

Motherboard
	Super PDSGE

Processor/Cache
CPU	€¢ Single LGA775 ZIF Socket €¢ Supports an Intel® Pentium® D (Dual Core) processor €¢ Supports an Intel® Pentium® Extreme Edition processor €¢ Supports an Intel® Pentium® 4 processor €¢ Supports an Intel® Pentium® 4 Extreme Edition processor €¢ Supports an Intel® Celeron® D processor €¢ Hyper-Threading (HT) capable
System Bus	€¢ 1066 / 800 / 533 MHz system bus

System Memory
Memory Capacity	€¢ Four 240-pin DIMM sockets €¢ Supports up to 8 GB of unbuffered, ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
Memory Type	€¢ DDR2 667/533/400MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Size	€¢ 256 MB, 512 MB, 1 GB, 2GB
Memory Voltage	€¢ 1.8V only

On-Board Devices
Chipset	€¢ Intel 955X (Glenwood) €¢ ICH7R + PXH-V + Intel® 82573V
Serial ATA	€¢ Intel® ICH7R SATA (3 Gbps) controller built-in €¢ Host RAID 0, 1, 5, and 10 Support
Network Controllers	€¢ Single-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa) €¢ Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
Audio	€¢ AC'97 audio CODEC with high quality 6-channel sound
Super I/O	€¢ Winbond 83627EHF chip

Expansion Slots
PCI-Express	€¢ 1 (x16) slot €¢ 1 (x1) slot
PCI-X	€¢ 2x 64-bit 133MHz PCI-X (3.3V) slot
PCI	€¢ 3x 32-bit 33MHz PCI (5V) slot

Input/Output
Serial ATA	€¢ Four Serial ATA ports ( 3Gbps performance) €¢ Four SATA hard drives supported
IDE	€¢ One EIDE channel supports up to two UDMA IDE devices €¢ Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	€¢ 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN	€¢ 1x RJ45 LAN port
USB	€¢ 8x USB 2.0 compliant / 1.1 compatible (6x ports + 2x headers) €¢ 2 in front (FUCI), 6 in rear
Audio	€¢ 1x Line In / Line Out / Microphone ports €¢ Front Panel Header
Keyboard/Mouse	€¢ PS/2 keyboard and mouse ports
Serial Ports	€¢ 1x Fast UART 16550 serial port €¢ 1x Serial Header
Parallel Ports	€¢ 1x ECP/EEP Parallel Port

System Bios
Bios Type	€¢ 8Mb Flash EEPROM with AwardBIOS®
Bios Features	€¢ User Over-Clock in System BIOS €¢ Plug and Play (PnP) €¢ APM 1.2 €¢ DMI 2.3 support €¢ PCI 2.2 €¢ ACPI 1.0 €¢ BIOS rescue hot keys €¢ USB Keyboard support

Chassis
Form Factor	€¢ MidTower

Dimension and Weight
Height	€¢ 16.8" (427mm)
Width	€¢ 7" (178mm)
Depth	€¢ 20.9" (531mm)
Gross Weight	€¢ 39 lbs (17.7kg)
Available Color	€¢ Beige,Black

Front Panel
Buttons	€¢ Power On/Off button €¢ System Reset button
LED	€¢ Power LED €¢ Hard drive activity LED €¢ Network activity LEDs €¢ System Overheat LED
Ports	€¢ 2x Front side USB ports (USB 2.0 ready)

Drive Bays
Hot-swap	€¢ 4x 3.5"Serial ATA hot-swap drive bays
Peripheral Bay(s)	€¢ 2x 5.25" peripheral drive bay €¢ 1x 3.5" bay for floppy drive

Peripheral Drives
Floppy	€¢ TEAC 3.5" 1.44MB Floppy Drive

System Cooling
Fans	€¢ 1x 12cm rear exhaust fan €¢ 1x 9cm mounted thermal cooling fan €¢ 2x 8cm fans (450W power supply configuration)

SATA Backplane
	€¢ 4 x 3.5" SATA Backplane

Power Suplly
	450W low-noise AC power supply with redundant cooling feature (with PFC)
AC Voltage	€¢ 100 - 240V, 50/60Hz, 10 Amp
DC Output	€¢ 5V + 3.3V ‰¤ 160W €¢ 12V1 + 12V2 + 12V3 ‰¤ 34 Amp
+5V	€¢ 26 Amp
+5V standby	€¢ 2 Amp
+12V1	€¢ 15 Amp
+12V2	€¢ 15 Amp
+12V3	€¢ 18 Amp
-12V	€¢ 1.0 Amp
+3.3V	€¢ 30.0 Amp

PC Health Monitoring
CPU	€¢ Monitors for CPU Cores, +1.5V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT €¢ CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V €¢ Adjustable CPU clock frequency ratio settings (via BIOS)
FAN	€¢ Total of five 4-pin fan headers €¢ 5x fans with tachometer monitoring €¢ Status monitor with firmware / software speed control €¢ Support 4-pin PWM fan (with speed control)
Temperature	€¢ Monitoring for CPU and chassis environment €¢ CPU thermal trip support €¢ Thermal Monitor (TM2) Support
LED	€¢ CPU / System Overheat LED €¢ +5V standby alert LED €¢ Suspend-state indicator LED
Other Features	€¢ Chassis intrusion detection €¢ Chassis intrusion header €¢ Lead Free (not 100%)