Supermicro 1U Twin Rackmount SuperServer SYS-5016Ti-TF
Key Features:
Two systems (nodes) in a 1U form factor. Each node supports the following: • Single socket H2 (LGA 1155) supports Intel® Xeon® E3-1200 & v2 series, 2nd Gen Core i3 processors*
• Intel® Xeon® X3400 / L3400 series, Coreâ„¢ i3 & Pentium® processors
with LGA 1156 socket
• Up to 32GB DDR3 1333/1066/800MHz ECC Registered DIMM or
16GB Unbuffered DIMM
• 1 (x16) PCI-E 2.0 (Low Profile)
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Dual Intel® 82574L Gigabit Ethernet Controllers
• 2x Hot-swap SATA Drive Bays
• 920W Platinum-Level High-efficiency Power Supply
Supermicro SYS-5016Ti-TF 1U Rackmount with 920W Platinum-Level High-efficiency Power Supplies, 2x 3.5" SATA Hot-swap drive bays, using 2x Super X8SIT-F and CSE-808TQ-920B
Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-5016Ti-TF | • SuperServer 5016Ti-TF (Black) |
Motherboard |
|
|---|---|
| 2x Super X8SIT-F | |
Processor/Cache |
|
|---|---|
| CPU | • LGA 1156 Socket |
System Memory |
|
|---|---|
| Memory Capacity |
• 6x 240-pin DDR3 DIMM slots • Supports up to 32 GB DDR3 ECC Registered memory (RDIMM) in 6 DIMM slots • Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM slots • 1333 / 1066 / 800 MHz • Dual Core processors of Ci3 and Pentium: support ECC UDIMM only Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements |
| Note | • All X3400 series and L3426 CPU support RDIMM and UDIMM • All i3 series, L3406, G6950, and G1101 CPU support UDIMM only |
| Memory Type | • 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | • 1.5 V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
On-Board Devices (per node) |
|
|---|---|
| Chipset | • Intel® 3420 chipset |
| SATA | • 6x SATA (3 Gbps) |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • Nuvoton WPCM450 BMC |
| Network Controllers | • Dual Intel® 82574L Gigabit Ethernet Controllers • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| VGA | • Matrox G200eW 16MB DDR2 |
| Super I/O | • Nuvoton W83627DHG UBE |
Input/Output (per node) |
|
|---|---|
| Serial ATA | • 6 SATA ports • 2 SATA hard drives supported |
| LAN | • 2x RJ45 LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB rear ports • 1x USB on-board • 2x USB internal header (4 ports) • Total 7 USB 2.0 Compliant |
| VGA | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 serial port
|
Chassis |
|
|---|---|
| Form Factor | • 1U Rackmount |
| Model | • CSE-808TQ-920B |
Dimension and Weight |
|
|---|---|
| Height | • 1.7" (43mm) |
| Width | • 17.2" (437mm) |
| Depth | • 27.75" (705mm) |
| Weight | • 40 lbs (18.1kg) |
| Available Color | • Black |
Front Panel (per node) |
|
|---|---|
| Buttons | • Power On/Off button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED |
Expansion Slots (per node) |
|
|---|---|
| PCI-Express | • 1 (x16) PCI-E 2.0 (Low Profile) |
Drive Bays (per node) |
|
|---|---|
| Hot-swap | • 2x 3.5" SATA Hot-swap drive bays |
SATA Backplane |
|
|---|---|
| • 1U SATA Backplane | |
System Cooling |
|
|---|---|
| Fans | • 6x Cooling Fans |
Power Supply with Power Distributor |
|
|---|---|
| 920W high-efficiency (94+%) power supply with PMBus | |
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | • 4 Amp @ +5V standby • 75 Amp @ +12V |
| Certification | • Platinum Certified |
Management |
|
|---|---|
| Software | • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support • SuperDoctor® III • Watch Dog • NMI |
| Power Configuration | • ACPI Power Management • Main Switch Override Mechansim • Power-on mode for AC power recovery |
PC Health Monitoring |
|
|---|---|
| CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | • Total of 5 fan headers supporting up to 5 fans • Five 4-pin fan headers • 5x fans with tachometer status monitoring • Status monitor for speed control • Status monitor for on/off control • Support 3-pin fans (w/o speed control) • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • FC temperature sensing logic • Thermal Monitor 2 (TM2) support • PECI |
| LED | • CPU / System Overheat LED • +5V Standby alert LED |
| Other Features | • Chassis intrusion detection • Chassis intrusion header |
Operating Environment / Compliance |
|
|---|---|
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature:
10°C to 40°C (50°F to 104°F) |