Supermicro SYS-1028UX-LL3-B8 1U Rackmount SuperServer NVME

Call for price
In stock
SKU
SYS-1028UX-LL3-B8

Key Features:
€¢ Support Hyper-Speed
• Dual Intel® Xeon® processor E5-2689 v4 (Broadwell)
• 8x 8GB DDR4-2400MHz (Default), up to DDR4- 2400€ MHz ; 16x DIMM slots
• Expansion slots via riser card:
  2x PCI-E 3.0 x16, Full-height Full-length
  1x PCI-E 3.0 x8, Low-profile
  1x PCI-E 3.0 x8 SAS3 integrated
• 4x Gigabit Ethernet LAN ports
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• 10x 2.5" Hot-swap Drive Bays:
  8x SAS3 (LSI 3108),
  2x SATA3, 2x NVMe ports support via optional AOC-URN2-I2XT
  (with 2x 10GBase-T ports)
• 8x heavy duty fans w/ optimal fan speed control
• 750W Redundant Power Supplies Platinum Level (94%+)

Due to the complexity of integration, this product is sold as completely assembled systems only (including but not limited to CPUs, memory, and HDDs). At least one low-latency NIC from this list must be selected and installed into the system. Please contact your Will Jaya sales rep for special requirements.
SuperServer SYS-1028UX-LL3-B8 1U Rackmount

Supermicro SYS-1028UX-LL3-B8 1U Rackmount with 750W Redundant Power Supplies,Intel® C612 chipset and using Supermicro Super X10DRU-XLL Motherboard and
CSE-119UTS-R751P-T 1U Rackmount Chassis.
Product SKU
• SuperServer 1028UX-LL3-B8 (Black)
Motherboard
        Super X10DRU-XLL
Processor/Cache
CPU • Intel® Xeon® processor E5-2689 v4 (Included) *
• Dual Socket R3 (LGA 2011)
Cores / Cache • Up to 10 Cores / Up to 25MB Cache
System Bus • QPI up to 9.6 GT/s
Note • €  BIOS version 2.0 or above is required
 

* Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity • 8x 8GB DDR4-2400MHz (Default)
• 16x 288-pin DDR4 DIMM slots
• Up to 2TB€  ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type

• 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
• 3DS LRDIMM: 128GB
Memory Voltage • 1.2V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SAS • LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC

Graphics • ASPEED AST2400 BMC
Input/Output
SAS • 8x SAS3 (12Gbps) ports
SATA • 2x SATA3 (6Gbps) ports
NVMe • 2x NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT)
LAN • 4x RJ45 Gigabit Ethernet ports
• 1x RJ45 Dedicated IPMI LAN port
USB

• 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)

Video

• 1x VGA Connector

Serial Port / Header

• 1x Fast UART 16550 serial
• 1x COM port (rear)

System Bios
Bios Type • 128Mb SPI Flash EEPROM with AMI BIOS
Bios Features

• Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chassis
Form Factor • 1U Rackmount
Model CSE-119UTS-R751P-T
Dimension and Weight
Height • 1.7" (43mm)
Width • 17.2" (437mm)
Depth • 27.8" (706mm)
Gross Weight • 48 lbs (21.8 kg)
Available Color • Black
Front Panel
Buttons

• Power On/Off button
• System Reset button

LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED / UID LED
Expansion Slot
PCI-Express

Expansion slots via riser card:
• 2x PCI-E 3.0 x16, Full-height Full-length, up to 10.5"
• 1x PCI-E 3.0 x8, Low-profile
• 1x PCI-E 3.0 x8 SAS3 integrated

Drive Bays
Hot-Swap

• 8x 2.5" Hot-swap SAS3 drive bays
• 2x 2.5" Hot-swap SATA3 drive bays
• Optional NVMe support: 2x NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports)

System Cooling
Fans

• 8x heavy duty fans with optimal fan speed control

Air Shroud • 2x Air Shroud
Power Supply
  750W Redundant Power Supplies with PMBus
Total Output Power • 750W
Dimension
(W x H x L)
• 73.5 x 40 x 203 mm
Input • 100-127Vac / 9.5A Max / 47-63Hz
• 200-240Vac / 4.5A Max / 47-63Hz
+12V • Max: 62.5A / Min: 0A
+12Vsb • Max: 2.1A / Min: 0A
Output Type • 25 Pairs Gold Finger Connector
Certification • Platinum Level
PC Health Monitoring
CPU

• Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator

FAN • Total of eight 4-pin PWM fans
• 8x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
Temperature • Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI
LED • Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED
Other Features • SDDC Support
Operating Environment
Environmental Spec.

• Operating Temperature: 10° to 35°C (50° to 95°F)
• Non-operating Temperature: -40° to 70°C (-40° to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

Copyright © 2014-present Will Jaya Inc. All rights reserved.