Supermicro SYS-1028UX-CR-LL1 1U SuperServer Rackmount NVME
Call for price
In stock
SKU
SYS-1028UX-CR-LL1
Key Features:
• Support Hyper-Speed
• Dual Intel® Xeon® processor E5-2643 v3 (Haswell)
• Default: 8x 8GB 2133MHz DDR4, up to DDR4- 2400€ MHz ; 16x DIMM slots
• Expansion slots via riser card
• 4x Gigabit Ethernet LAN ports
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• 10x 2.5" Hot-swap Drive Bays
• 8x heavy duty fans w/ optimal fan speed control
• 750W Redundant Power Supplies Platinum Level (94%+)
• Support Hyper-Speed
• Dual Intel® Xeon® processor E5-2643 v3 (Haswell)
• Default: 8x 8GB 2133MHz DDR4, up to DDR4- 2400€ MHz ; 16x DIMM slots
• Expansion slots via riser card
• 4x Gigabit Ethernet LAN ports
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• 10x 2.5" Hot-swap Drive Bays
• 8x heavy duty fans w/ optimal fan speed control
• 750W Redundant Power Supplies Platinum Level (94%+)
Due to the complexity of integration, this product is sold as completely assembled systems only (including but not limited to CPUs, memory, and HDDs). At least one low-latency NIC from this list must be selected and installed into the system. Please contact your Will Jaya sales rep for special requirements.
SuperServer SYS-1028UX-CR-LL1(Complete System Only)
Supermicro 1028UX-CR-LL1 Dual Xeon E5-2643 v3 750W (Redundant) 16 DIMM,up to 1TB DDR4 10x 2.5" SATA3 or 8 SAS3 1U Rackmount Server Barebone
Product SKU |
|
|---|---|
| SYS-1028UX-CR-LL1 | €¢ SuperServer 1028UX-CR-LL1 (Black) |
Motherboard |
|
|---|---|
| Super X10DRU-XLL | |
Processor/Cache |
|
|---|---|
| CPU | €¢ Intel® Xeon® processor E5-2643 v3 €¢ Dual Socket R3 (LGA 2011) |
| Cores/Cache | €¢ Up to 6 Cores / Up to 20MB Cache |
| System Bus | €¢ QPI up to 9.6 GT/s |
| Note | €¢ BIOS version 2.0 or above is required |
System Memory |
|
|---|---|
| Memory Capacity |
€¢ 8x 8GB DDR4 2133MHz (Default) €¢ 16x 288-pin DDR4 DIMM slots €¢ Up to 2TB€ ECC 3DS LRDIMM, 768GB ECC RDIMM |
| Memory Type | €¢ 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes |
€¢ RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB €¢ LRDIMM: 64GB, 32GB €¢ 3DS LRDIMM: 128GB |
| Memory Voltage | €¢ 1.2 V |
| Error Detection | €¢ Corrects single-bit errors |
On-Board Devices |
|
|---|---|
| Chipset | €¢ Intel® C612 chipset |
| SAS | €¢ LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support |
| SATA | €¢ SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI |
€¢ Support for Intelligent Platform Management Interface v.2.0 €¢ IPMI 2.0 with virtual media over LAN and KVM-over-LAN support €¢ ASPEED AST2400 BMC |
| Graphics | €¢ ASPEED AST2400 BMC |
Input/Output |
|
|---|---|
| SATA | €¢ 2x SATA3 (6Gbps) ports |
| SAS |
€¢ 8x SAS3 (12Gbps) ports |
| NVMe | €¢ 2x NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT) |
| LAN |
€¢ 4x RJ45 Gigabit Ethernet ports €¢ 1x RJ45 Dedicated IPMI LAN port |
| USB | €¢ 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | €¢ 1x VGA Connector |
| Serial Port | €¢ 1x Fast UART 16550 serial €¢ 1x COM port (rear) |
System Bios |
|
|---|---|
| Bios Type | €¢ 128Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features |
€¢ Plug and Play (PnP) €¢ APM 1.2 €¢ PCI 2.3 €¢ ACPI 1.0 / 2.0 / 3.0 / 4.0 €¢ USB Keyboard support €¢ SMBIOS 2.7.1 €¢ UEFI 2.3.1 |
Chassis |
|
|---|---|
| Form Factor | €¢ 1U Rackmount |
| Model | €¢ CSE-119UTS-R751P-T |
Dimension and Weight |
|
|---|---|
| Height | €¢ 1.7" (43mm) |
| Width | €¢ 17.2" (437mm) |
| Depth | €¢ 27.8" (706mm) |
| Gross Weight | €¢ 48 lbs (21.8 kg) |
| Available Color | €¢ Black |
Front Panel |
|
|---|---|
| Buttons |
€¢ Power On/Off button €¢ System Reset Button |
| LED |
€¢ Power LED €¢ Hard drive activity LED €¢ 2x Network activity LEDs €¢ System Overheat LED / Fan fail LED / UID LED |
Expansion Slots |
|
|---|---|
| PCI-Express |
Expansion slots via riser card: (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
Drive Bays |
|
|---|---|
| Hot Swap |
€¢ 8x 2.5" Hot-swap SAS3 drive bays €¢ 2x 2.5" Hot-swap SATA3 drive bays €¢ Optional NVMe support: 2x NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports) |
System Cooling |
|
|---|---|
| Fans | €¢ 8x heavy duty fans with optimal fan speed control |
| Air Shroud | €¢ 1x Air Shroud |
Power Supply |
|
|---|---|
| 750W Redundant Power Supplies with PMBus | |
| Total Output Power | €¢750W |
| Dimension (W x H x L) | €¢ 73.5 x 40 x 203 mm |
| Input | €¢ 100-127Vac / 9.5A Max / 47-63Hz €¢ 200-240Vac / 4.5A Max / 47-63Hz |
| +12V | €¢ Max: 62.5A / Min: 0A |
| 12V SB | €¢ Max: 2.1A / Min: 0A |
| Output Type | €¢ 25 Pairs Gold Finger Connector |
| Certification | €¢ Platinum Level (94%) |
PC Health Monitoring |
|
|---|---|
| Voltage |
€¢ Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. €¢ CPU Core 6-Phase-switching voltage regulator |
| FAN |
€¢ Total of ten 4-pin PWM fans €¢ 10x fans with tachometer monitoring €¢ Status monitor for speed control €¢ Status monitor for on/off control €¢ Low noise fan speed control |
| Temperature |
€¢ Monitoring for CPU and chassis environment €¢ CPU thermal trip support €¢ Thermal Control for 10x Fan Connectors €¢ PSU I2C temperature sensing logic €¢ Thermal Monitor 2 (TM2) support €¢ PECI |
| LED | €¢ Power Fail / Overheat LED €¢ Suspend-state Indicator LED €¢ UID LEDED |
| Other Features | €¢ SDDC Support |
Operating Environment / Compliance |
|
|---|---|
| RoHS | €¢ RoHS Compliant |
| Environmental Spec. |
€¢ Operating Temperature:
10°C to 30°C (50°F to 86°F) €¢ Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) €¢ Operating Relative Humidity: 8% to 90% (non-condensing) €¢ Non-operating Relative Humidity: 5% to 95% (non-condensing) |