Supermicro SYS-1028U-TNR4T+ 1U SuperServer Rackmount NVME
Call for price
In stock
SKU
SYS-1028U-TNR4T+
Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
• Up to 3TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 24x DIMM slots
• 2x PCI-E 3.0 x16 slots (FH, 10.5" L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
• 4x 10GBase-T ports
• 10x Hot-swap 2.5" Drive Bays
• 5x heavy duty fans w/ optimal fan speed control
• 750W Redundant Power Supplies Platinum Level (94%+)
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
• Up to 3TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 24x DIMM slots
• 2x PCI-E 3.0 x16 slots (FH, 10.5" L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
• 4x 10GBase-T ports
• 10x Hot-swap 2.5" Drive Bays
• 5x heavy duty fans w/ optimal fan speed control
• 750W Redundant Power Supplies Platinum Level (94%+)
Due to the complexity of integration, this product is sold as completely assembled systems only (with minimum 2 CPU, 4 DIMM). Please contact your Will Jaya sales rep for special requirements.
SuperServer SYS-1028U-TNR4T+
(Complete System Only)
Supermicro 1028U-TNR4T+ DP Xeon E5-2600 v4€ / v3 750W,24 DIM slotsM, up to 3TB DDR4, 10x Hot-swap 2.5 drive bays and 750W Redundant Power Supply.
Product SKU |
|
|---|---|
| SYS-1028U-TNR4T+ | €¢ SuperServer 1028U-TNR4T+ (Black) |
Motherboard |
|
|---|---|
| Super X10DRU-i+ | |
Processor/Cache |
|
|---|---|
| CPU | €¢ Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) * €¢ Dual Socket R3 (LGA 2011) |
| Cores/Cache | €¢ Up to 22 Cores€ / Up to 55MB€ Cache |
| System Bus | €¢ QPI up to 9.6 GT/s |
| Note | €¢ BIOS version 2.0 or above is required |
| €¢ Please contact WillJaya Technical support for additional information | |
System Memory |
|
|---|---|
| Memory Capacity |
€¢ 24x 288-pin DDR4 DIMM slots €¢ Up to 3TB€ ECC 3DS LRDIMM, 768GB ECC RDIMM |
| Memory Type | €¢ 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | €¢ 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | €¢ 1.2 V |
| Error Detection | €¢ Corrects single-bit errors |
On-Board Devices |
|
|---|---|
| Chipset | €¢ Intel® C612 chipset |
| SATA | €¢ SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI |
€¢ Support for Intelligent Platform Management Interface v.2.0 €¢ IPMI 2.0 with virtual media over LAN and KVM-over-LAN support €¢ ASPEED AST2400 BMC |
| Network Connectivity | €¢ 4x 10GBase-T ports via AOC-URN2-i4XT €¢ Intel® X540 10GBase-T €¢ 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | €¢ ASPEED AST2400 BMC |
Input/Output |
|
|---|---|
| SATA | €¢ 10x SATA3 (6Gbps) ports |
| SAS |
€¢ 8x SAS3 ports support via optional Add-on Card |
| NVMe | €¢ 2x NVMe ports |
| LAN |
€¢ 4x RJ45 10GBase-T ports €¢ 1x RJ45 Dedicated IPMI LAN port |
| USB | €¢ 5x USB 3.0 ports (2 rear, 2 front, 1 Type A) |
| Video | €¢ 1x VGA Connector |
| Serial Port | €¢ 1x Serial header |
System Bios |
|
|---|---|
| Bios Type | €¢ 128Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features |
€¢ Plug and Play (PnP) €¢ APM 1.2 €¢ PCI 2.3 €¢ ACPI 1.0 / 2.0 / 3.0 / 4.0 €¢ USB Keyboard support €¢ SMBIOS 2.7.1 €¢ UEFI 2.3.1 |
Management |
|
|---|---|
| Software |
€¢ SuperDoctor® 5 €¢ Intel® Node Manager 3.0 €¢ Watch Dog €¢ NMI €¢ SUM and SSM €¢ Optional IPMI 1.5 / 2.0 |
| Power Configuration |
€¢ ACPI Power Management €¢ Power-on mode for AC power recovery |
Chassis |
|
|---|---|
| Form Factor | €¢ 1U Rackmount |
| Model | €¢ CSE-119UAC2-R750 |
Dimension and Weight |
|
|---|---|
| Height | €¢ 1.7" (43mm) |
| Width | €¢ 17.2" (437mm) |
| Depth | €¢ 27.82" (707mm) |
| Gross Weight | €¢ 41 lbs (18.6 kg) |
| Available Color | €¢ Black |
Front Panel |
|
|---|---|
| Buttons |
€¢ Power On/Off button €¢ System Reset Button |
| LED |
€¢ Power LED €¢ Hard drive activity LED €¢ 2x Network activity LEDs €¢ System Overheat LED / Fan fail LED / UID LED |
Expansion Slots |
|
|---|---|
| PCI-Express |
€¢ 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L) €¢ 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
Drive Bays |
|
|---|---|
| Hot Swap |
€¢ 10x 2.5" Hot-swap drive bays €¢ Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports €¢ Optional 8x SAS3 ports via AOC |
System Cooling |
|
|---|---|
| Fans |
€¢ 5x heavy duty fans with optimal fan speed control €¢ 3x additional fans optional |
| Air Shroud | €¢ 1x Air Shroud |
Power Supply |
|
|---|---|
| 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output | |
| AC Input | €¢ 100-127Vac, 50-60Hz €¢ 200-240Vac, 50-60Hz |
| +12V | €¢ Max: 62.5A & Min: 0A (100Vac-127Vac) €¢ Max: 62.5A & Min: 0A (200Vac-240Vac) |
| 12Vsb | €¢ Max: 2.1A / Min: 0A |
| Certification | €¢ Platinum Level |
PC Health Monitoring |
|
|---|---|
| Voltage |
€¢ Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. €¢ 5+1 Phase-switching voltage regulator |
| FAN |
€¢ 8x 4-pin fan headers €¢ Status monitor for speed control €¢ Pulse Width Modulated (PWM) fan connectors |
| Temperature |
€¢ Support to monitor Supermicro AOC temperatures from IPMI or SD 5 €¢ Monitoring for CPU and chassis environment €¢ CPU thermal trip support €¢ Thermal Control for 8x Fan Connectors €¢ Thermal Monitor 2 (TM2) support €¢ PECI |
| LED | €¢ Memory DIMM ECC error LEDs €¢ CPU / System Overheat LED €¢ Suspend static indicator LED €¢ UID/Remote UID |
| Other Features | €¢ 4x 8-pin GPU power connectors €¢ Chassis intrusion detection €¢ Chassis intrusion header €¢ SDDC Support €¢ RoHS |
Operating Environment / Compliance |
|
|---|---|
| RoHS | €¢ RoHS Compliant |
| Environmental Spec. |
€¢ Operating Temperature:
10°C to 35°C (50°F to 95°F) €¢ Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) €¢ Operating Relative Humidity: 8% to 90% (non-condensing) €¢ Non-operating Relative Humidity: 5% to 95% (non-condensing) |