Supermicro SYS-1028U-TN10RT+ 1U Rackmount NVME SuperServer

Call for price

In stock

SKU

SYS-1028U-TN10RT+

Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
• Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM slots
• 3x PCI-E 3.0 x8 slots (2x FH 10.5"" L, 1x LP)
• 2x 10GBase-T ports
• 10x 2.5"" Hot-swap Drive Bays: 6x NVMe ports (NVMe from CPU 1); 4x NVMe/SAS3 hybrid ports for optional SAS3/SATA3 (NVMe from CPU 2)
• 1000W Redundant Power Supplies

Due to the complexity of integration, this product is sold as completely assembled systems only (with minimum 2 CPU, 4 DIMM and 4 NVMe). Please contact your Will Jaya sales rep for special requirements.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer 1028U-TN10RT+ (Complete System Only)

Supermicro SYS-1028U-TN10RT+ 1U Rackmount Server Barebone with 1000W Redundant Power Supplies Titanium Level (96%), 10x 2.5"" Hot-swap Drive Bays: 6x NVMe ports (NVMe
from CPU 1); 4x NVMe/SAS3 hybrid ports for optional SAS3/SATA3 (NVMe from CPU 2) using Supemricro Super X10DRU-i+ Server Motherboard and Supermicro CSE-119UAC2-R1K02 1U Rackmount Server Chassis.

Product SKU
SYS-1028U-TN10RT+	€¢ SuperServer 1028U-TN10RT+ (Black)

Motherboard
	Super X10DRU-i+

Processor/Cache
CPU	€¢ Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 160W TDP) €¢ Dual Socket R3 (LGA 2011)
Cores/Cache	€¢ Up to 22 Cores€ / Up to 55MB€ Cache
System Bus	€¢ QPI up to 9.6 GT/s
Note	€¢ BIOS version 2.0 or above is required
Error Detection	€¢ Please contact WillJaya Technical support for additional information

System Memory
Memory Capacity	€¢ 24x 288-pin DDR4 DIMM slots €¢ Up to 3TB€ ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type	€¢ 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	€¢ 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage	€¢ 1.2 V
Error Detection	€¢ Corrects single-bit errors

On-Board Devices
Chipset	€¢ Intel® C612 chipset
SATA	€¢ SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	€¢ Support for Intelligent Platform Management Interface v.2.0 €¢ IPMI 2.0 with virtual media over LAN and KVM-over-LAN support €¢ ASPEED AST2400 BMC
Network Connectivity	€¢ 2 10GBase-T ports via AOC-URN6-i2XT €¢ Intel® X540 10GBase-T €¢ 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics	€¢ ASPEED AST2400 BMC

Input/Output
NVMe/SAS	€¢ 6 NVMe ports (NVMe from CPU 1) €¢ 4 NVMe/SAS3 Hybrid ports (NVMe from CPU 2)
LAN	€¢ 2 RJ45 10GBase-T ports €¢ 1 RJ45 Dedicated IPMI LAN port
USB	€¢ 5 USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video	€¢ 1 VGA Connector
Serial Port	€¢ 1 Serial header
DOM	€¢ 2 SuperDOM (Disk on Module) ports

System Bios
Bios Type	€¢ 128Mb SPI Flash EEPROM with AMI BIOS
Bios Features	€¢ Plug and Play (PnP) €¢ APM 1.2 €¢ PCI 2.3 €¢ ACPI 1.0 / 2.0 / 3.0 / 4.0 €¢ USB Keyboard support €¢ SMBIOS 2.7.1 €¢ UEFI 2.3.1

Management
Software	€¢ SuperDoctor® 5 €¢ Intel® Node Manager 3.0 €¢ Watch Dog €¢ NMI €¢ SUM and SSM €¢ Optional IPMI 1.5 / 2.0
Power Configuration	€¢ ACPI Power Management €¢ Power-on mode for AC power recovery

Chassis
Form Factor	€¢ 1U Rackmount
Model	€¢ CSE-119UAC2-R1K02

Dimension and Weight
Height	€¢ 1.7" (43mm)
Width	€¢ 17.2" (437mm)
Depth	€¢ 27.82" (707mm)
Gross Weight	€¢ 48 lbs (21.8 kg)
Available Color	€¢ Black

Front Panel
Buttons	€¢ Power On/Off button €¢ System UID button
LED	€¢ Power LED €¢ Hard drive activity LED €¢ 2x Network activity LEDs €¢ UID LED

Expansion Slots
PCI-Express	€¢ 3 PCI-E 3.0 x8 slots (2 Full-height 10.5" L; 1 Low-profile) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays
Hot Swap	€¢ 10x 2.5" Hot-swap drive bays €¢ 6 NVMe ports (NVMe from CPU 1) €¢ 4 NVMe/SAS3 hybrid ports for optional SAS3/SATA3 (NVMe from CPU 2)

System Cooling
Fans	€¢ 8 heavy duty fans with optimal fan speed control
Air Shroud	€¢ 1 Air Shroud

Power Suplly
	1000W Redundant Power Supplies with PMBus
Total Output Power	€¢ 800W/1000W
Dimension (W x H x L)	€¢ 73.5 x 40 x 203 mm
Input	€¢ 100-127Vac / 9.8 - 7A / 50-60Hz €¢ 200-240Vac / 7 - 5A / 50-60Hz
+12V	€¢ Max: 66.7A / Min: 0A (100-127Vac) €¢ Max: 83A / Min: 0A (200-240Vac)
12Vsb	€¢ Max: 2.1A / Min: 0A
Output Type	€¢ 25 Pairs Gold Finger Connector
Certification	€¢ UL/cUL/CB/BSMI/CE/CCC Titanium Level

PC Health Monitoring
Voltage	€¢ Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. €¢ 5+1 Phase-switching voltage regulator
FAN	€¢ 8x 4-pin fan headers €¢ Status monitor for speed control €¢ Pulse Width Modulated (PWM) fan connectors
Temperature	€¢ Support to monitor Supermicro AOC temperatures from IPMI or SD 5 €¢ Monitoring for CPU and chassis environment €¢ CPU thermal trip support €¢ Thermal Control for 8x Fan Connectors €¢ Thermal Monitor 2 (TM2) support €¢ PECI
LED	€¢ Memory DIMM ECC error LEDs €¢ CPU / System Overheat LED €¢ Suspend static indicator LED €¢ UID/Remote UID
Other Features	€¢ 4x 8-pin GPU power connectors €¢ Chassis intrusion detection €¢ Chassis intrusion header €¢ SDDC Support €¢ RoHS

Operating Environment / Compliance
RoHS	€¢ RoHS Compliant
Environmental Spec.	€¢ Operating Temperature: 10°C to 35°C (50°F to 95°F) €¢ Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) €¢ Operating Relative Humidity: 8% to 90% (non-condensing) €¢ Non-operating Relative Humidity: 5% to 95% (non-condensing)