Supermicro SYS-1028U-E1CRTP+ 1U Rackmount SuperServer

Call for price

In stock

SKU

SYS-1028U-E1CRTP+

Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
• Up to 3TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 24x DIMM slots
• 2x PCI-E 3.0 x16 slots (FH, 10.5" L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
• 2x 10G SFP+ and 2x GbE LAN ports
• 10x Hot-swap 2.5" drive bays
• 6x heavy duty fans w/ optimal fan speed control
• 750W Redundant Power Supplies Platinum Level (94%+)

Due to the complexity of integration, this product is sold as completely assembled systems only (with minimum 2 CPU, and 4 DIMM). Please contact your Will Jaya sales rep for special requirements.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer 1028U-E1CRTP+ (Complete System Only)

Supermicro SYS-1028U-E1CRTP+ 1U Rackmount Server Barebone with 750W Redundant Power Supplies Platinum Level (94%), 10x 2.5"" Hot-swap drives supported via expander; 4 using Supemricro Super X10DRU-i+ Server Motherboard and Supermicro CSE-119UTS-R751P-T 1U Rackmount Server Chassis.

Product SKU
SYS-1028U-E1CRTP+	€¢ SuperServer 1028U-E1CRTP+ (Black)

Motherboard
	Super X10DRU-i+

Processor/Cache
CPU	€¢ Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) * €¢ Dual Socket R3 (LGA 2011)
Cores/Cache	€¢ Up to 22 Cores€ / Up to 55MB€ Cache
System Bus	€¢ QPI up to 9.6 GT/s
Note	€¢ BIOS version 2.0 or above is required
	€¢ Please contact WillJaya Technical support for additional information

System Memory
Memory Capacity	€¢ 24x 288-pin DDR4 DIMM slots €¢ Up to 3TB€ ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type	€¢ 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	€¢ RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB €¢ LRDIMM: 64GB, 32GB €¢ 3DS LRDIMM: 128GB
Memory Voltage	€¢ 1.2 V
Error Detection	€¢ Corrects single-bit errors

On-Board Devices
Chipset	€¢ Intel® C612 chipset
SATA	€¢ SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	€¢ Support for Intelligent Platform Management Interface v.2.0 €¢ IPMI 2.0 with virtual media over LAN and KVM-over-LAN support €¢ ASPEED AST2400 BMC
Network Connectivity	€¢ 2x GbE and 2x SFP+ ports via AOC-URN2-I4GXS €¢ Intel® i350 Gigabit Ethernet Controller €¢ Intel® X710 10G SFP+ €¢ 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	€¢ ASPEED AST2400 BMC

Input/Output
SAS	€¢ 10x SAS3 ports support via expander and storage Add-on Cards €¢ One of the following storage Add-on cards required: AOC-S3108L-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3 16 HDD) AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3) AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3) AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
LAN	€¢ 2x RJ45 GbE LAN ports €¢ 2x 10G SFP+ ports €¢ 1x RJ45 Dedicated IPMI LAN port
USB	€¢ 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video	€¢ 1x VGA Connector
Serial Port	€¢ 1x Serial header

System Bios
Bios Type	€¢ 128Mb SPI Flash EEPROM with AMI BIOS
Bios Features	€¢ Plug and Play (PnP) €¢ APM 1.2 €¢ PCI 2.3 €¢ ACPI 1.0 / 2.0 / 3.0 / 4.0 €¢ USB Keyboard support €¢ SMBIOS 2.7.1 €¢ UEFI 2.3.1

Management
Software	€¢ SuperDoctor® 5 €¢ Intel® Node Manager 3.0 €¢ Watch Dog €¢ NMI €¢ SUM and SSM €¢ Optional IPMI 1.5 / 2.0
Power Configuration	€¢ ACPI Power Management €¢ Power-on mode for AC power recovery

Chassis
Form Factor	€¢ 1U Rackmount
Model	€¢ CSE-119UTS-R751P-T

Dimension and Weight
Height	€¢ 1.7" (43mm)
Width	€¢ 17.2" (437mm)
Depth	€¢ 27.82" (707mm)
Gross Weight	€¢ 41 lbs (18.6 kg)
Available Color	€¢ Black

Front Panel
Buttons	€¢ Power On/Off button €¢ System Reset Button
LED	€¢ Power LED €¢ Hard drive activity LED €¢ 2x Network activity LEDs €¢ System Overheat LED / Fan fail LED / UID LED

Expansion Slots
PCI-Express	€¢ 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L) €¢ 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays
Hot Swap	€¢ 10x 2.5" Hot-swap drives supported via expander

System Cooling
Fans	€¢ 6x heavy duty fans with optimal fan speed control €¢ 2x additional fans optional
Air Shroud	€¢ 1x Air Shroud

Power Suplly
	750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input	€¢ 100-127Vac, 50-60Hz €¢ 200-240Vac, 50-60Hz
+12V	€¢ Max: 62.5A & Min: 0A (100Vac-127Vac) €¢ Max: 62.5A & Min: 0A (200Vac-240Vac)
12Vsb	€¢ Max: 2.1A / Min: 0A
Certification	€¢ Platinum Level

PC Health Monitoring
Voltage	€¢ Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. €¢ 5+1 Phase-switching voltage regulator
FAN	€¢ 8x 4-pin fan headers €¢ Status monitor for speed control €¢ Pulse Width Modulated (PWM) fan connectors
Temperature	€¢ Support to monitor Supermicro AOC temperatures from IPMI or SD 5 €¢ Monitoring for CPU and chassis environment €¢ CPU thermal trip support €¢ Thermal Control for 8x Fan Connectors €¢ Thermal Monitor 2 (TM2) support €¢ PECI
LED	€¢ Memory DIMM ECC error LEDs €¢ CPU / System Overheat LED €¢ Suspend static indicator LED €¢ UID/Remote UID
Other Features	€¢ 4x 8-pin GPU power connectors €¢ Chassis intrusion detection €¢ Chassis intrusion header €¢ SDDC Support €¢ RoHS

Operating Environment / Compliance
RoHS	€¢ RoHS Compliant
Environmental Spec.	€¢ Operating Temperature: 10°C to 35°C (50°F to 95°F) €¢ Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) €¢ Operating Relative Humidity: 8% to 90% (non-condensing) €¢ Non-operating Relative Humidity: 5% to 95% (non-condensing)