Supermicro SYS-1028U-E1CR4+ 1U Rackmount SuperServer

Call for price
In stock
SKU
SYS-1028U-E1CR4+
Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
• Up to 3TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 24x DIMM slots
• 2x PCI-E 3.0 x16 slots (FH, 10.5" L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
• 4x Gigabit Ethernet LAN ports
• 10x Hot-swap 2.5" drive bays
• 5x heavy duty fans w/ optimal fan speed control
• 750W Redundant Power Supplies Platinum Level (94%+)

Due to the complexity of integration, this product is sold as completely assembled systems only (with minimum 2 CPU, and 4 DIMM). Please contact your Will Jaya sales rep for special requirements.
SuperServer 1028U-E1CR4+ (Complete System Only)

Supermicro SYS-1028U-E1CR4+ 1U Rackmount Server Barebone with 750W Redundant Power Supplies Platinum Level (94%), 10x 2.5"" Hot-swap drives supported via expander; 4 using Supemricro Super X10DRU-i+ Server Motherboard and Supermicro CSE-119UTS-R751P-T 1U Rackmount Server Chassis.

Product SKU
€¢ SuperServer 1028U-E1CR4+ (Black)
Motherboard
       Super X10DRU-i+
Processor/Cache
CPU €¢ Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) *
€¢ Dual Socket R3 (LGA 2011)
Cores/Cache €¢ Up to 22 Cores€  / Up to 55MB€  Cache
System Bus €¢ QPI up to 9.6 GT/s
Note €¢ BIOS version 2.0 or above is required
Error Detection €¢ Please contact WillJaya Technical support for additional information
System Memory
Memory Capacity €¢ 24x 288-pin DDR4 DIMM slots
€¢ Up to 3TB€  ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type €¢ 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes €¢ 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage €¢ 1.2 V
Error Detection €¢ Corrects single-bit errors
On-Board Devices
Chipset €¢ Intel® C612 chipset
SATA €¢ SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI €¢ Support for Intelligent Platform Management Interface v.2.0
€¢ IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
€¢ ASPEED AST2400 BMC
Network Connectivity €¢ 4x 10GBase-T ports via AOC-UR-i4G
€¢ Intel® i350 Gigabit Ethernet Controller
€¢ 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics €¢ ASPEED AST2400 BMC
Input/Output
SAS

€¢ 10x SAS3 ports support via expander and storage Add-on Cards
€¢ One of the following storage Add-on cards required:

AOC-S3108L-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3 16 HDD)

AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)

AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)

LAN €¢ 4x RJ45 GbE LAN ports
€¢ 1x RJ45 Dedicated IPMI LAN port
USB €¢ 5x USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video €¢ 1x VGA Connector
Serial Port €¢ 1x Serial header
System Bios
Bios Type €¢ 128Mb SPI Flash EEPROM with AMI BIOS
Bios Features €¢ Plug and Play (PnP)
€¢ APM 1.2
€¢ PCI 2.3
€¢ ACPI 1.0 / 2.0 / 3.0 / 4.0
€¢ USB Keyboard support
€¢ SMBIOS 2.7.1
€¢ UEFI 2.3.1
Management
Software €¢ SuperDoctor® 5
€¢ Intel® Node Manager 3.0
€¢ Watch Dog
€¢ NMI
€¢ SUM and SSM
€¢ Optional IPMI 1.5 / 2.0
Power Configuration €¢ ACPI Power Management
€¢ Power-on mode for AC power recovery






Chassis
Form Factor €¢ 1U Rackmount
Model €¢ CSE-119UTS-R751P-T
Dimension and Weight
Height €¢ 1.7" (43mm)
Width €¢ 17.2" (437mm)
Depth €¢ 27.82" (707mm)
Gross Weight €¢ 41 lbs (18.6 kg)
Available Color €¢ Black
Front Panel
Buttons €¢ Power On/Off button
€¢ System Reset Button
LED €¢ Power LED
€¢ Hard drive activity LED
€¢ 2x Network activity LEDs
€¢ System Overheat LED / Fan fail LED / UID LED
Expansion Slots
PCI-Express €¢ 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
€¢ 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays
Hot Swap €¢ 10x 2.5" Hot-swap drives supported via expander
System Cooling
Fans €¢ 5x heavy duty fans with optimal fan speed control
Air Shroud €¢ 3x additional fans optional
Power Suplly
  750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
Total Output Power €¢ 800W/1000W
AC Input €¢ 100-127Vac, 50-60Hz
€¢ 200-240Vac, 50-60Hz
+12V €¢ Max: 62.5A & Min: 0A (100Vac-127Vac)
€¢ Max: 62.5A & Min: 0A (200Vac-240Vac)
12Vsb €¢ Max: 2.1A / Min: 0A
Certification €¢ Platinum Level
PC Health Monitoring
Voltage €¢ Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
€¢ 5+1 Phase-switching voltage regulator
FAN €¢ 8x 4-pin fan headers
€¢ Status monitor for speed control
€¢ Pulse Width Modulated (PWM) fan connectors
Temperature €¢ Support to monitor Supermicro AOC temperatures from IPMI or SD 5
€¢ Monitoring for CPU and chassis environment
€¢ CPU thermal trip support
€¢ Thermal Control for 8x Fan Connectors
€¢ Thermal Monitor 2 (TM2) support
€¢ PECI
LED €¢ Memory DIMM ECC error LEDs
€¢ CPU / System Overheat LED
€¢ Suspend static indicator LED
€¢ UID/Remote UID
Other Features €¢ 4x 8-pin GPU power connectors
€¢ Chassis intrusion detection
€¢ Chassis intrusion header
€¢ SDDC Support
€¢ RoHS
Operating Environment / Compliance
RoHS €¢ RoHS Compliant
Environmental Spec. €¢ Operating Temperature: 10°C to 35°C (50°F to 95°F)
€¢ Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
€¢ Operating Relative Humidity: 8% to 90% (non-condensing)
€¢ Non-operating Relative Humidity: 5% to 95% (non-condensing)

Copyright © 2014-present Will Jaya Inc. All rights reserved.