Supermicro 1U Rackmount SuperServer SYS-1027R-WC1NRT
Key Features:
• Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and
E5-2600 v2 family€
• Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM slots
• 1x PCI-E 3.0 x16 (Full-height, Half-length)
• 10x Hot-swap 2.5" drive bays (8x SAS3 and 2x NVMe PCIe SSD/SATA3)
• Intel® X540 Dual port 10GBase-T
• 700W Redundant Power Supplies Gold Level Certified
Product SKU |
|
|---|---|
| SYS-1027R-WC1NRT | SuperServer 1027R-WC1NRT (Black) |
Motherboard |
|
|---|---|
| Super X9DRW-CTF31 | |
Processor / Cache |
|
|---|---|
| CPU |
Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family€ (up to 130W TDP) |
| Note | € BIOS version 3.0 or above is required |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
System Memory |
|
|---|---|
| Memory Capacity | 16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC and non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Size | 64GB (LRDIMM), 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On Board Devices |
|
|---|---|
| Chipset | Intel® C602J Chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1 |
| SAS | SAS3 (12Gbps) via LSI 3108 RAID 0, 1, 5, 6, 10, 50, 60 support 2GB DDR3 Cache |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® x540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | G200 (Nuvoton WPCM450 BMC) |
Input / Output |
|
|---|---|
| Serial ATA / NVMe PCIe SSD | 2x SATA3 (6Gbps) / NVMe PCIe SSD ports |
| SAS | 8x SAS3 (12Gbps) ports |
| LAN | 2x RJ45 10GBase-T ports |
| USB | 6x USB 2.0 ports total (4 rear, 2 front) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 header |
Management |
|
|---|---|
| Software | SuperDoctor® III Watch Dog NMI SUM and SSM IPMI 2.0 Intel Node Manager |
| Power Configurations | ACPI / APM Power Management |
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | CSE-116AC2-R700WB |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 23.5" (597mm) |
| Gross Weight | 46 lbs (20.9kg) |
| Available Color | Black |
Front Panel |
|
|---|---|
| Buttons |
Power On/Off button UID button |
| LEDs | Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED |
Expansion Slot |
|
|---|---|
| PCI-Express | 1 PCI-E 3.0 x16 Full-height, Half-length slot (CPU2 Required) |
Drive Bays |
|
|---|---|
| Hot-swap | 10 Hot-swap 2.5" drive bays (8 SAS3 and 2 NVMe PCIe SSD/SATA3) |
Backplane |
|
|---|---|
| SAS/SATA/NVMe PCIe SSD | |
System Cooling |
|
|---|---|
| Fans | 5x 40x56mm Counter-rotating PWM Fans |
Power Supply |
|
|---|---|
| 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C | |
| AC Voltage | 700W: 100 - 140 V, 50-60 Hz, 8.5-6 Amp 750W: 180 - 240V, 60-50 Hz, 5-3.8 Amp |
| DC Output +5V standby |
3 Amp |
| DC Output +12V | 700W: 58 Amp @ 100-140V 750W: 62 Amp @ 180-240V |
| With Power Distributor | +5V: 25 Amp +3.3V: 12 Amp -12V: 0.6 Amp |
| Certification | Gold Certified |
System Bios |
|
|---|---|
| Bios Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 BIOS resuce hot keys USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature:
10°C to 35°C (50°F to 95°F)
|