Supermicro SuperStorage SBB SSG-6038R-DE2CR16L (Complete System Only)

Call for price

In stock

SKU

SSG-6038R-DE2CR16L

Key Features:
• Two hot-pluggable systems (nodes)
• Dual socket R3 (LGA 2011)
• Intel® Xeon® processor E5
• Up to 1TB of memory
•16x 3.5" Hot-swap SAS3/SATA3 drive bays with SES2
• 12x 4cm PWM cooling fans
• 1200W Redundant Power Supplies Titanium Level (96%)

Due to the complexity of integration, this product is sold as a completely assembled system only (including 4 CPUs, 4 DIMMs, 1 HDD). Please contact your Will Jaya sales rep for special requirements.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Supermicro SuperStorage Bridge Bay SBB SSG-6038R-DE2CR16L (Complete System Only)

Product SKU
SSG-6038R-DE2CR16L	• SuperServer 6038R-DE2CR16L (Black)

Motherboard (Two per System)
	• Super X10DRS-3U

Processor/Cache (per Node)
CPU	• Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011)
Cores / Cache	• Up to 22 Cores€ / Up to 55MB€ Cache
System Bus	• QPI up to 9.6 GT/s
	€ BIOS version 2.0 or above is required
Notes	* Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory (per Node)
Memory Capacity	• 8x 288-pin DDR4 DIMM slots • Up to 1TB€ ECC 3DS LRDIMM, 256GB ECC RDIMM
Memory Type	• 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	• RDIMM: 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB • 3DS LRDIMM: 128GB
Memory Voltage	• 1.2 V
Error Detection	• Corrects single-bit errors
NVDIMM	• NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details)

On-Board Devices (per Node)
Chipset	• Intel® C612 chipset
SAS	• SAS3 (12Gbps) via Broadcom 3008
SATA	•SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	• Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC
Network Controllers	• Dual 10GBase-T LAN with Intel® X540 Ethernet Controller • Virtual Machine Device Queues reduce I/O overhead • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Realtek RTL8201N PHY (dedicated IPMI)
Graphics	• ASPEED AST2400 BMC
Others	• PCI-E 3.0 x8 node to node/NTB connectivity • PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required

Input/Output (per Node)
SAS	• 2 JBOD expansion ports per node (mini-SAS HD)
LAN	• 2 RJ45 10GBase-T LAN ports • IPMI LAN shared port
USB	• 3 USB 3.0 ports (2 rear + 1 Type A)
VGA	• 1 VGA port
Serial Port/ Header	• 1 COM port (rear)

Chassis
Form Factor	• 3U Rackmount
Model	• CSE-937ETS-R0NDBP-X10

Dimension and Weight
Width	• 17.25" (438mm)
Height	• 5.25" (133mm)
Depth	• 26.25" (667mm)
Gross Weight	• 75 lbs (34.0 kg)
Available Colors	• Black

Front Panel
Buttons	• Power On/Off button
LEDs	• Power LED • Heartbeat LED • 2 Network activity LEDs • Power Fail LED • Overheat/Fan Fail LED

Expansion Slots (per Node)
PCI-Express	• 3 PCI-E 3.0 x8 (1 FHHL, 2 LPHL) slots per controller

Drive Bays
Hot-swap	• 16x 3.5" Hot-swap SAS drive bays with SES2

Backplane
	• SAS3 12Gbps passive backplane, redundant architecture with single expander on each motherboard. Motherboard also support 2x mini-SAS HD connectors for JBOD expansion

System Cooling
Fans	• 12x 4cm PWM cooling fans • Redundant cooling

Power Supply (76mm Width)
	• 1200W Redundant Power Supplies with PMBus
Total Output Power	• 1000W/1200W
Dimension (W x H x L)	• 76 x 40 x 336 mm
Input	• 100-127Vac / 15-12A / 50-60Hz • 200-240Vac / 8.5-7A / 50-60Hz • 200-240Vdc / 8.5-7A (for CCC only)
+12V	• Max: 83A / Min: 0A (100-127Vac) • Max: 100A / Min: 0A (200-240Vac) • Max: 100A / Min: 0A (200-240Vdc)
+5Vsb	• Max: 4A / Min: 0A
Output Type	• 19 Pairs Gold Finger Connector
Certification	• Titanium Level

System BIOS
BIOS Type	• 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	• Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI

Operating Environment
RoHS	• RoHS Compliant
Environmental Spec.	• Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing)