Supermicro SuperServer SYS-5038ML-H8TRF

Call for price

In stock

SKU

SYS-5038ML-H8TRF

Key Features:
• Intel® Xeon® processor E3-1200 v3/v4 family,
   Intel® 4th/5th Gen Core„¢ i3,
   Pentium,
   Celeron processors
• 2x 3.5" SAS/SATA HDDs
• Up to 32GB DDR3 ECC UDIMM 1600/1333MHz
   support in 4 sockets
• 2x GbE LAN (Intel i350), 1x Dedicated LAN for
   IPMI Remote Management
• 1x PCI-E 3.0 x8 and 1x Micro-LP
• 1x VGA, 1x COM ports, 2x USB 2.0 (with KVM dongle)
• 4x 8cm heavy duty hot-swap fans with optimal cooling zone (per system)
• 1620W Redundant power supplies Platinum Level Certified (per system)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Supermicro SuperServer SYS-5038ML-H8TRF

Product SKU
SuperServer	SYS-5038ML-H8TRF

Motherboard
	Super X10SLD-F

Processor/Cache
CPU	Intel® Xeon® processor E3-1200 v3/v4 family, Intel® 4th/5th Gen Core„¢ i3, Pentium, Celeron processors Up to 84W Socket H3 (LGA 1150)

System Memory (per node)
Memory Capacity	4x 240-pin DDR3 DIMM slots Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated UDIMMs
DIMM Sizes	8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

Expansion Slots (per node)
PCI-Express	1x PCI-E 3.0 x8 Low-profile slot 1x Micro-LP for Dual GbE (pre-installed); 10GbE or IB AOC optional

Network Devices (per node)
Micro-LP NIC	Intel® i350 GbE controller Dual RJ-45 connectors Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/O Acceleration Technology (I/O AT) MicroLP Adapter Matrix (Networking options)

On-Board Devices (per node)
Chipset	Intel® C224 PCH chipset
SATA	1x SATA DOM 2x SATA3 (6Gbps) w/ RAID 0 and 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support ASPEED AST2400 BMC
Graphics	ASPEED AST2400 Graphics (BMC with Graphic controller)

Input / Output (per node)
SATA	2x SATA3 (6Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
DOM	SATA DOM (Disk on Module) power connector support
KVM	1x VGA, 1x COM and 2x USB 2.0 (with KVM dongle)

System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3

Rear Window (per node)
Switch	Power / UID

Chassis
Form Factor	3U
Model	CSE-938BH-R1620B

Dimension & Weight
Height	5.21" (132.5 mm)
Width	17.26" (438.4 mm)
Depth	23.2" (589 mm)
Gross Weight	88 lbs (39.92 kg)
Available Colors	Black

Front Panel
Buttons	Power On/Off button
LEDs	Power LED Node status LED

Drive Bays (per node)
Internal	2x 3.5" hot-swap SATA3 (6Gbps) HDDs per node; up to 16 HDDs total Enterprise SATA HDD only recommended

System Cooling
Fans	4x 8cm Heavy duty fans with optimal cooling zone

Power Supply
	1620W high-efficiency redundant power supply w/ PMBus
AC Input	1000W Output @ 100-120V, 12-10A, 50-60Hz 1200W Output @ 120-140V, 12-10A, 50-60Hz 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
DC Output	1000W: +12V/84A; +5Vsb/4A 1200W: +12V/100A; +5Vsb/4A 1620W: +12V/150A; +5Vsb/4A
Certification	Platinum Certified

PC Health Monitoring
CPU	Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
FAN	Cooling zone
Temperature	Monitoring for CPU and chassis environment

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)