Supermicro SuperServer SYS-4028GR-TVRT ( Complete System Only ) 4U Rackmount
Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4€ / v3 family; QPI up to 9.6GT/s
• Up to 3TB€ ECC 3DS LRDIMM , up to DDR4- 2400€ MHz ; 24x DIMM slots
• 4 PCI-E 3.0 x16 (low-profile) slots 2 PCI-E 3.0 x8 (low-profile) slots
M.2 Interface: PCI-E 3.0 x4
M.2 Form Factor: 2260, 2280, 22110
• Dual 10GBase-T LAN with Intel® X540
• 16 Hot-swap 2.5" SATA/SAS drives; Supports 8 NVMe drives
• 8x 92mm cooling fans
• 2200W Redundant (2+2) Power Supplies; Titanium Level (96%+)
Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (with minimum 2 CPUs, 4 DIMMs, 4 GPUs installed).
Product SKU
| |
---|---|
SYS-4028GR-TVRT | • SuperServer 4028GR-TVRT (Black) |
Motherboard
| |
---|---|
• Super X10DGO-T |
Processor/Cache
|
|
---|---|
CPU | • Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) • Dual Socket R3 (LGA 2011) |
Cores/Cache | • Up to 22 Cores€ / Up to 55MB€ Cache |
System Bus | • QPI up to 9.6 GT/s |
Note | BIOS version 2.0 or above is required |
Note | Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
GPU | • Up to 8 Tesla V100 SXM2 • Up to 300GB/s GPU-to-GPU NVLINK |
System Memory
| |
---|---|
Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 3TB€ ECC 3DS LRDIMM, 2TB ECC RDIMM |
Memoy Type | • 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | • RDIMM: 32GB, 16GB, 8GB, 4GB |
Memory Voltage | • 1.2 V |
Error Detection | • Corrects single-bit errors |
On-Board Devices
| Chipset | • Intel® C612 chipset |
---|---|
SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 |
Network Connectivity | • Dual Port 10GbE with Intel X540 Ethernet Controller |
Graphics |
• ASPEED AST2400 BMC |
Input/Output
| SATA | • 10 SATA3 (6Gbps) ports | LAN | • 2 RJ45 10GBase-T LAN ports • 1 RJ45 Dedicated IPMI LAN port |
USB | • 2 USB 3.0 ports |
---|---|
Video | • 1 VGA Connector |
Serial Port | • 1 Serial header |
System BIOS
| |
---|---|
BIOS Type | • 128Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features |
• Plug and Play (PnP) • APM 1.2 • DMI 2.3 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI |
Chassis
| |
---|---|
Form Factor | • 4U Rackmountable • Rackmount Kit (MCP-290-31401-0N) |
Model | • CSE-R422BG-2 |
Dimension and Weight
| |
---|---|
Height | • 7.0" (178mm) |
Width | • 17.6" (447mm) |
Depth | • 31.7" (805mm) |
Gross Weight | • 135 lbs (61.2 kg) |
Available Colors | • Black |
Drive Bays
| |
---|---|
Hot-swap | • 16 Hot-swap 2.5" SATA/SAS drive bays |
Expansion Slots
| |
---|---|
PCI-Express |
• 4 PCI-E 3.0 x16 (low-profile) slots |
M.2 | • M.2 Interface: PCI-E 3.0 x4 • Form Factor: 2260, 2280, 22110 |
System Cooling
| |
---|---|
Fans | • 8x 92mm Cooling Fans |
Shrouds | • 1 Air Shroud (MCP-310-41808-0B) |
Power Supply
| |
---|---|
• 2200W Redundant Titanium Level Power Supplies with PMBus | |
Total Output Power | • 1200W/1800W/1980W/2090W/2200W (UL/cUL only) |
Dimension
(W x H x L) |
• 106.5 x 82.4 x 203.5 mm |
Input | • 1200W: 100-127 Vac / 14-11 A / 50-60 Hz • 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz • 1980W: 220-230 Vac / 10-9.5 A / 50-60 Hz • 2090W: 230-240 Vac / 10-9.8 A / 50-60 Hz • 2200W: 220-240 Vac / 12-11 A / 50-60 Hz (UL/cUL only) • 2090W: 180-220 Vac / 14-11 A / 50-60 Hz (UL/cUL only) • 2090W: 230-240 Vdc / 10-9.8 A (CCC only) |
+12V |
• Max: 100A / Min: 0A (1200W) • Max: 150A / Min: 0A (1800W) • Max: 165A / Min: 0A (1980W) • Max: 174.17A / Min: 0A (2090W) • Max: 183.3A / Min: 0A (2200W) • Max: 174.17A / Min: 0A (2090W) |
12Vsb | • Max: 2A / Min: 0A |
Output Type | •Gold Finger (connector on M/P) |
Certification | • Titanium Level |
PC Health Monitoring
| |
---|---|
CPU | • Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages |
Fan | • Total of seven 4-pin PWM fans • 7 fans with tachometer monitoring • Status monitor for speed control • Status monitor for on/off control • Low noise fan speed control |
Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8 Fan Connectors • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support • PECI |
LED | • Power Fail / Overheat LED • Suspend-state Indicator LED • UID LED |
Other Features | • SDDC Support |
Operating Environment
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. | • Operating Temperature:
10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |