Supermicro Superserver 2U Rackmount SYS-2029BT-HER
Key Features:
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
• Dual Socket P (LGA 3647) support 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
• 24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz€ RDIMM/LRDIMM, Supports Intel® Optane„¢ DCPMM
• 2 PCI-E 3.0 (x16) Low-profile slots, 1
• 10 EDSFF (E1.S) drive bays and 2 SATA M.2 drive bays per node
• IPMI 2.0 + KVM with dedicated LAN
• Video via Aspeed AST2500 BMC
• 4 Heavy duty 8cm PWM fans with air shroud
• 2600W Redundant Power Supplies Titanium Level (96%)
Complete System Only: Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (with minimum 2 CPUs, 4 DIMMs, and 10 E1.S drives).
Product SKU
| |
---|---|
SYS-2029BT-HER | • SuperServer 2029BT-HER (Black) |
Motherboard
| |
---|---|
• Super X11DPT-BR |
Processor/Cache
|
|
---|---|
CPU | • Dual Socket P (LGA 3647) • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s • Support CPU TDP up to 165W |
Cores | • Up to 28 Cores |
Note | BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Will Jaya Technical Support for additional information. |
System Memory
| |
---|---|
Memory Capacity | • 24 DIMM slots • Up to 6TB 3DS ECC DDR4-2933MHz€ RDIMM/LRDIMM • Supports Intel® Optane„¢ DCPMM |
Memoy Type | • 2933€ /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
Note | € 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Will Jaya Cascade Lake only |
On-Board Devices
| Chipset | • Intel® C621 chipset |
---|---|
Network | • Must bundle with at least one SIOM network card |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 |
Video |
• ASPEED AST2500 BMC |
Input/Output
| DOM | • 1 SuperDOM (Disk on Module) port | LAN | • 1 RJ45 Dedicated IPMI LAN port | USB | • 2 USB 3.0 ports (rear) |
---|---|
Video | • 1 VGA port |
Others | • M.2 and SATA DOM for boot drive only |
System BIOS
| |
---|---|
BIOS Type | • AMI 32Mb SPI Flash ROM |
Management
| |
---|---|
Software | • Intel® Node Manager • IPMI 2.0 • KVM with dedicated LAN • SSM, SPM, SUM • SuperDoctor® 5 • Watch Dog |
PC Health Monitoring
| CPU | • Monitors for CPU Cores, Chipset Voltages, Memory • 4+1 Phase-switching voltage regulator |
FAN | • Fans with tachometer monitoring • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • Thermal Control for fan connectors |
---|
Chassis
| |
---|---|
Form Factor | • 2U Rackmount |
Model | • CSE-217BEQ+-R2K60P |
Dimension and Weight
| |
---|---|
Width | • 17.6" (447mm) |
Height | • 3.47" (88mm) |
Depth | • 28.75" (730mm) • 39.3" (997mm) with rails |
Package | • 24.65" (H) x 9.76" (W) x 45.28" (D) |
Weight | • Gross Weight: 85 lbs (38.6kg) • Net Weight: 54.5 lbs (24.7 kg) |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons | • Power On/Off button |
LEDs |
• Power status LED |
Expansion Slots
| |
---|---|
PCI-Express |
• 2 PCI-E 3.0 (x16) Low-profile slots |
Drive Bays / Storage
| |
---|---|
E1.S |
• 10 E1.S devices (per Node) |
M.2 | • 2 SATA M.2 (per Node) |
System Cooling
| |
---|---|
Fans | • 4 Heavy duty 8cm PWM fans with air shroud |
AC/DC240V Input Redundant Power Supply
| |
---|---|
• 2600W Redundant Power Supplies with PMBus | |
Total Output Power | • 2600W: 208 €“ 240Vac • 2600W: 220 €“ 240Vdc (for CQC only) |
Dimension
(W x H x L) |
• 45 x 40 x 480 mm |
Input | • 208-240Vac / 15-12.5A / 50-60Hz • 220-240Vdc/13.5-12.5A (CQC only) |
+12V |
• Max: 216.6A / Min: 0A |
12Vsb | • Max: 4.5A / Min: 0A |
Output Type | • Gold Finger (4HP+2LP-20S output connector) |
Certification | • Titanium Level |
Operating Environment
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. |
• Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |