Supermicro Server Board X11SSQ | Single socket H4 (LGA 1151) | Micro-ATX
Key Features:
• Micro-ATX
• Single socket H4 (LGA 1151)
• Intel® Q170 Express
• Up to 64GB of memory
• 6 SATA3 (6Gbps) via Q170; RAID 0, 1, 5, 10
Product SKUs
| |
---|---|
MBD-X11SSQ | • X11SSQ |
Physical Stats
|
|
---|---|
Form Factor | • Micro-ATX |
Dimensions | • 9.6" x 9.6" (24.38cm x 24.38cm) |
Processor/Cache
| |
---|---|
CPU | • Intel® 6th Generation Core™ i3 series, Intel® 6th Generation Core™ i5 series, Intel® 6th Generation Core™ i7 series, Intel® 7th Generation Core™ i3 series, Intel® 7th Generation Core™ i5 series, Intel® 7th Generation Core™ i7 series, Intel® Celeron®, Intel® Pentium® |
Note | • BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ Processors |
System Memory
| Memory Capacity | •Up to 64GB Unbuffered non-ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots |
---|---|
Memory Type | • 2400/2133/1866MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
DIMM Sizes | • 4GB, 8GB, 16GB |
Memory Voltage | • 1.2V |
OnBoard Devices
| Chipset | • Intel® Q170 Express |
---|---|
IPMI | • Intel® Q170 Express controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 • Intel RST |
Network Controllers | • Single LAN with Intel® PHY I219LM LAN controller • Single LAN with Intel® Ethernet Controller I210-AT |
Audio | • ALC 888S HD Audio |
Graphics | • Intel® HD Graphics • 3 Independent Displays |
Input/Output
| |
---|---|
SATA | • 6 SATA3 (6Gbps) ports |
LAN | • 2 RJ45 Gigabit Ethernet LAN ports |
USB | • 8 USB 2.0 ports (4 rear + 4 headers) • 8 USB 2.0 ports (4 rear + 4 headers) 4 USB 3.0 ports (2 rear + 2 headers) |
Video Output | • 1 HDMI port, 1 DP (DisplayPort) port, 1 DVI - D port • 3 Independent Displays |
Serial Port/Header |
• 4 COM Ports (4 headers) |
TPM |
• TPM Header |
Others |
• 8 bit GPIO, Force On mode by jumper and AC recovery |
Expansion Slots
| |
---|---|
PCI-E | • 1 PCI-E 3.0 x16 |
M.2 | • 1 M.2 PCI-E 3.0 x2, 2242/2260/2280 |
System BIOS
| |
---|---|
BIOS Type | • AMI UEFI |
BIOS Features | • Plug and Play (PnP) • DMI 2.3 • USB Keyboard support • UEFI 2.3.1 • ACPI 5.0 • SMBIOS 3.0 • PCI 3.0 |
Management
| |
---|---|
Software | • AMT, NMI, SuperDoctor® 5, vPro, Watchdog |
Power Configuration | • ACPI Power Management |
PC Health Monitoring
| |
---|---|
Voltage | • Voltage +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 4 -fan status, Chassis intrusion header, Memory, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature, VBAT |
FAN | • 4x 4-pin fan headers (up to 4 fans), Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Support 3-pin fans (w/o speed control), System level control, Thermal control tachometer fan connectors |
Temperature | • CPU thermal trip support, Adaptive Thermal Monitor, PECI 3.0, Thermal Monitor 2 (TM2) support, PECI |
LED | • CPU / System Overheat LED, Standby alert LED |
Other Features | • ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Intel Smart Response Technology, M.2 NGFF connector, RoHS, System level control, WOL |
Operating Environment
| |
---|---|
Operating Temperature Range |
• Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F) |
Non-Operating Temperature Range |
• -20°C ~ 60°C (-4°F ~ 140°F) |
Operating Relative Humidity Range |
• 10% ~ 85% (non-condensing) |
Non-Operating Relative Humidity Range | • 10% ~ 95% (non-condensing) |