Supermicro Server Board X11SPD-F | Intel® Xeon® Scalable | Proprietary Form Factor
Key Features:
• Proprietary
• Intel® Xeon® Scalable
• Up to 1TB of Memory
• Intel® C241
• 2 SATA3 (6 Gbps) ports
|
Product SKUs
| |
|---|---|
| MBD-X11SPD-F | • X11SPD-F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary |
| Dimensions | • 4.66" x 18.5" (11.84cm x 46.99cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Scalable Processors (Cascade Lake/Skylake). |
| Cores / Cache | • Up to 24 cores |
|
System Memory
| Memory Capacity | • Up to 1TB 3DS ECC RDIMM, DDR4-2933MHz; Up to 512GB ECC LRDIMM, DDR4-2933MHz, in 4 DIMM slots |
|---|---|
| Memory Type | • 2933/2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM |
| DIMM Sizes | • 8GB, 16GB, 32GB, 64GB, 128GBRDIMM: 8GB, 16GB, 32GB, 64GB • LRDIMM: 32GB, 64GB, 128GB • 3DS LRDIMM: 64GB, 128GB, 256GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • Intel® C621 |
|---|---|
| SATA | • Intel® C621 controller for 2 SATA3 (6 Gbps) ports |
| IPMI | • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2500 • via Backplane |
| Network Controllers | • Single LAN with Realtek RTL8211E PHY (dedicated IPMI) via Backplane |
| Graphics | • Aspeed AST2500 BMC • via KVM Connector |
|
Input/Output
| |
|---|---|
| SATA | • 2 SATA3 (6Gbps) ports |
| LAN | • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 2 USB 2.0 ports (2 rear Type A)); USB 2.0 via KVM Connector |
| Video Output | • 1 VGA port, • via KVM Connector |
| Serial Port/Header |
• 1 COM Port (1 rear), via KVM Connector
1 fast UART 16550 serial |
| TPM |
• 1 TPM Header |
| Others | • 1 KVM Connector for VGA,2 USB 2.0 and COM Ports |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x8 (Micro Low Profile), |
| M.2 | • M.2 Interface: 2 SATA/PCI-E 3.0 x4 |
|
System BIOS
| |
|---|---|
| BIOS Type | • UEFI 256Mb |
|
Management
| |
|---|---|
| Software | • IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog |
| System Mangement Software | • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.8V, +12V, +3.3V, +5V, +5V standby, HT, Memory, Memory Voltages, Monitors CPU voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature, VBAT |
| FAN | • Fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED, BMC/IPMI Heartbeat LED, UID/Remote UID, Power LED |
| Other Features | • Control of power-on for recovery from AC power loss, M.2 NGFF connector, RoHS, System level control, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 50°C (32°F ~ 122°F) |
| Non-Operating Temperature Range |
• -20°C ~ 60°C (-4°F ~ 140°F) |
| Operating Relative Humidity Range |
• 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 10% ~ 95% (non-condensing) |