Supermicro Server Board X11SDD-8C-F | Intel® Xeon® Processor D-2141I. | Proprietary
Key Features:
• Proprietary
• Intel® Xeon® Processor D-2141I
• Up to 256GB of Memory
• System on Chip
• 2 SATA3 (6 Gbps) ports;
|
Product SKUs
| |
|---|---|
| MBD-XX11SDD-8C-F | • X11SDD-8C-F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary |
| Dimensions | • 4.66" x 18.50" (11.84cm x 46.99cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Processor D-2141I |
| Cores / Cache | • 8 cores, 16 threads |
|
System Memory
| Memory Capacity | • Up to 256GB ECC RDIMM, DDR4-2133MHz; Up to 512GB ECC LRDIMM, in 4 DIMM slots |
|---|---|
| Memory Type | • 2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM • (Operating speed up to 2133MHz) |
| DIMM Sizes | • 8GB, 16GB, 32GB, 64GB, 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • System on Chip |
|---|---|
| SATA | • 2 SATA3 (6 Gbps) ports |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • via Backplane |
| Network Controllers | • Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) via Backplane |
| Graphics | • Aspeed AST2500 BMC • via KVM connector |
|
Input/Output
| |
|---|---|
| SATA | • 2 SATA3 (6Gbps) port |
| LAN | • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 2 USB 2.0 ports (2 rear Type A)); via KVM connector |
| Video Output | • 1 VGA port, via KVM connector |
| Serial Port/Header |
• 1 COM Port (1 rear), via KVM connector • 1 fast UART 16550 serial |
| TPM |
• 1 TPM Header |
| Others |
• 1 KVM Connector for USB 2.0, VGA and COM Ports |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x16 |
| M.2 | • 2 M.2 M-Key SATA/PCI-E 3.0 x4, |
|
System BIOS
| |
|---|---|
| BIOS Type | • 256Mb SPI Flash with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • ACPI 6.2 • SMBIOS 3.1 • UEFI 2.7 • PCI FW 3.2 • SMBIOS 2.8 |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® III, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +12V, +3.3V, +5V, +5V standby, 1.2V (VDIMM), 3.3V standby, HT, Memory, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature |
| FAN | • 1x 4-pin fan header (up to 1 fan), Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Adaptive Thermal Monitor, PECI 3.0, Monitoring for CPU and chassis environment |
| LED | • UID/Remote UID, CPU / System Overheat LED, BMC/IPMI Heartbeat LED |
| Other Features | • ACPI power management, CPU thermal trip support for processor protection, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range |
• -20°C ~ 60°C (-4°F ~ 140°F) |
| Operating Relative Humidity Range |
• 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range | • 10% ~ 95% (non-condensing) |