Supermicro Server Board X10SRG-F | Single Socket R3 (LGA 2011) | Proprietary Form Factor
Key Features:
• Proprietary
• Intel® Xeon®
• Up to 256GB of Memory
• 4 USB 3.0 ports, 6 USB 2.0 ports
|
Product SKUs
| |
|---|---|
| MBD-X10SRG-F | • X10SRG-F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary |
| Dimensions | • 7.71" x 16.64" (19.58cm x 42.27cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Processor E5-1600 v3, |
| Cores / Cache | • Up to 22 cores € / Up to 55MB€ cache |
| Note | € BIOS version 2.0 or above is required |
| ** Motherboard supports this maximum TDP. Please verify your system can thermally support. | |
|
System Memory
| Memory Capacity | • Up to 256GB Registered ECC RDIMM, DDR4-2400MHz; Up to 512GB LRDIMM LRDIMM, in 8 DIMM slotsUp to 1TB ECC 3DS LRDIMM |
|---|---|
| Memory Type | • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 4GB, 8GB, 16GB, 32GB • LRDIMM: 32GB, 64GB • 3DS LRDIMM: 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • Intel® C612 |
|---|---|
| SATA | • Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Dual LAN with Intel® i350 Gigabit Ethernet ControllerSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 10 SATA3 (6Gbps) port |
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 6 USB 2.0 ports (6 headers) • 4 USB 3.0 ports (2 rear + 1 header + 1 Type A) |
| Video Output | • 1 VGA port |
| Serial Port/Header |
• 1 COM Port (1 rear) • 1 fast UART 16550 serial |
| TPM | • TPM Header |
| Others | • 1 eUSB header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 2 PCI-E 3.0 x16 |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • DMI 2.3 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 • RTC (Real Time Clock) Wakeup |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI2.0, NMI, SuperDoctor® 5, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +12V, +3.3V, +5V, +5V standby, 8 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility |
| FAN | • 7x 4-pin fan headers (up to 7 fans), 3 fans with tachometer monitoring, 4 fans with tachometer monitoring, 7 fans with tachometer status monitoring, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI, I2C temperature sensing logic |
| LED | • CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID |
| Other Features | • ACPI power management, Chassis intrusion detection, Chassis intrusion header, Chipkill support, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Node Manager Support, RoHS, SDDC, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range |
• -20°C ~ 60°C (-4°F ~ 140°F) |
| Operating Relative Humidity Range |
• 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 10% ~ 95% (non-condensing) |