Supermicro Server Board X10SRD-F | Single Socket R3 (LGA 2011) | Proprietary Form Factor
Key Features:
• Proprietary
• Intel® Xeon®
• Up to 128GB of Memory
• Intel® C612
• 2 USB 3.0 (1 via header + 1 Type-A)
|
Product SKUs
| |
|---|---|
| MBD-X10SRD-F | • X10SRD-F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary |
| Dimensions | • 4.75" x 15.95" (12.07cm x 40.51cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Processor E5-1600 v3, |
| Cores / Cache | • Up to 22 cores € / Up to 55MB€ cache |
| Note | € BIOS version 2.0 or above is required |
| ** Motherboard supports this maximum TDP. Please verify your system can thermally support. | |
|
System Memory
| Memory Capacity | • Up to 128GB Registered ECC RDIMM; Up to 256GB Registered ECC LRDIMM, in 4 DIMM slots4x 288-pin DDR4 DIMM slots • Up to 512GB ECC 3DS LRDIMM |
|---|---|
| Memory Type | • 2400†/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
| DIMM Sizes | • RDIMM: 4GB, 8GB, 16GB, 32GB • LRDIMM: 32GB, 64GB • 3DS LRDIMM: 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • Intel® C612 |
|---|---|
| SATA | • SATA3 (6 Gbps) ports; RAID 0,11 SATA DOM |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Intel® i350, 2x Gigabit LAN ports
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Intel® I/OAT 3 support for fast, scaleable, and reliable networking • VMDq support for better performance of virtualization |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports |
| USB | • 2 USB 3.0 ports (1 header + 1 Type A) |
| Video Output | • 1 VGA port |
| TPM |
• 1 TPM Header |
| Others | • KVM: 1 VGA, 1 COM, and 2 USB 2.0 (with KVM dongle) ports |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x8 |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • RTC (Real Time Clock) Wakeup |
|
Management
| |
|---|---|
| Software | • IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, NMI, SuperDoctor® III, Watchdog |
| Power Configuration | • ACPI / ACPM Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V, Chipset Voltage, HT, Memory, Monitors for CPU Cores, System level control, VBAT |
| FAN | • 5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control, Support 3-pin fans (w/o speed control), System level control |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, FC temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED, +5V Standby alert LED |
| Other Features | • Chassis intrusion detection, Chassis intrusion header, System level control |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range |
• -20°C ~ 60°C (-4°F ~ 140°F) |
| Operating Relative Humidity Range |
• 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 10% ~ 95% (non-condensing) |