Supermicro Server Board X10SLH-F | Single Socket LGA 1150 | Micro-ATX
Key Features:
• Micro-ATX
• Intel® Core™,Pentium®,Xeon®
• Up to 32GB of Memory
• Intel® C226 Express PCH
• 6 USB 2.0 (4 rear, 2 via header)
|
Product SKUs
| |
|---|---|
| MBD-X10SLH-F | • X10SLH-F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Micro-ATX |
| Dimensions | • 9.6" x 9.6" (24.38cm x 24.38cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® 4th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series. |
|
System Memory
| Memory Capacity | • Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots • 4x 240-pin DDR3 DIMM sockets |
|---|---|
| Memory Type | • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | • 1.35V, 1.5V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • Intel® C226 Express PCH |
|---|---|
| SATA | • SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Network Controllers | • Dual LAN with Intel® Ethernet Controller I210-ATSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputRealtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 6 USB 2.0 ports (2 rear + 4 headers) • 4 USB 3.0 ports (2 rear + 1 header + 1 Type A) |
| Video Output | • 1 VGA port |
| Serial Port/Header |
• 2 COM Ports (1 rear, 1 header) |
| TPM | • 1 TPM Header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x8 (in x16 slot) |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • SMBIOS 2.7.1 • ACPI 5.0 • USB Keyboard support |
|
Management
| |
|---|---|
| Software | • IPMI2.0, NMI, SuperDoctor® III, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V, HT, VBAT |
| FAN | • 5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control, Support 3-pin fans (w/o speed control) |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, FC temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED, +5V Standby alert LED |
| Other Features | • Chassis intrusion detection, Chassis intrusion header |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 50°C (32°F ~ 122°F) |
| Non-Operating Temperature Range |
• -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range |
• 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 5% - 95% (non-condensing) |