Supermicro Server Board X10SDV-7TP8F | Intel® Xeon® D-1587 | Single Socket FCBGA1667
Key Features:
• Flex ATX
• Intel® Xeon® Processor D-1587
• Single Socket FCBGA1667
• System on Chip
• Up to 128GB of memory
|
Product SKUs
| |
|---|---|
| MBD-X10SDV-7TP8F | • X10SDV-7TP8F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Flex ATX |
| Dimensions | • 9.0" x 7.25" (22.86cm x 18.42cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Processor D-1587 |
| Cores/Cache | • 16 cores, 32 threads / 24MB cache |
|
System Memory
| Memory Capacity | • Up to 128GB Registered ECC RDIMM, DDR4-2133MHz • Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots |
|---|---|
| Memory Type | • 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM |
| DIMM Sizes | • 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • System on Chip |
|---|---|
| SATA | • SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10 • RSTe • Broadcom® 2116 SW controller for 16 SATA3 (6 Gbps) ports • SAS2 and SATA3 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Quad LAN with 1GbE with Inte® I350-AM4 • Dual LAN with 10G SFP+ from D-1500 SoC • Dual LAN with 1GbE with Intel® I210 |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 4 SATA3 ports via SoC controller |
| USB | • 5 USB 2.0 ports (4 headers, 1 Type A) • 2 USB 3.0 ports (2 rear) |
| Video Output | • 1 VGA port |
| Serial Port/Header |
• 1 COM Port (1 header) |
| TPM
|
• 1 TPM Header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 2 PCI-E 3.0 x8 |
| M.2 | •
1 M.2 SATA/PCI-E 3.0 x4, 2242/2280/22110 |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash with AMI BIOS |
| BIOS Features | • PCI 3.0 • ACPI 5.0 • USB Keyboard support • Hardware BIOS Virus protection • RTC (Real Time Clock) Wakeup • SMBIOS 2.8 • UEFI 2.4 |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature, VBAT |
| FAN | • 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED |
| Other Features | • 12V DC or ATX Power Source, 8-pin 12v DC power connector, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |