Supermicro Server Board X10SDV-6C+-TLN4F | Intel® Xeon® D-1528 | Single Socket FCBGA1667
Key Features:
• Mini-ITX
• Intel® Xeon® Processor D-1528
• Single Socket FCBGA1667 supported, CPU TDP support 35W
• System on Chip
• Up to 128GB of memory
|
Product SKUs
| |
|---|---|
| MBD-X10SDV-6C+-TLN4F | • X10SDV-6C+-TLN4F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Mini-ITX |
| Dimensions | • 6.7" x 6.7" (17.02cm x 17.02cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Processor D-1528 |
| Cores/Cache | • 6 cores, 12 threads / 9MB cache |
|
System Memory
| Memory Capacity | • Up to 128GB Registered ECC RDIMM, DDR4-2133MHz • Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots |
|---|---|
| Memory Type | • 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM |
| DIMM Sizes | • 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • System on Chip |
|---|---|
| SATA | • SoC controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Network Controllers | • Dual LAN with Intel® Ethernet Controller I350-AM2 • Dual LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output • SoC Dual 10GbE Controller • Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 6 SATA3 (6Gbps) port |
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 2 RJ45 10GBase-T ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 4 USB 2.0 ports (4 headers, Type A)) • 2 USB 3.0 ports (2 rear) |
| Video Output | • 1 VGA port |
| Serial Port/Header |
• 1 COM Port (1 header) |
| TPM | • TPM Header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x16 |
| M.2 | • 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280 |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash with AMI BIOS |
| BIOS Features | • PCI 3.0 • ACPI 5.0 • USB Keyboard support • Hardware BIOS Virus protection • RTC (Real Time Clock) Wakeup • SMBIOS 2.8 • UEFI 2.4 |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), 4 -fan status, Chassis intrusion header, Memory, Monitors for CPU Cores, Supports system management utility, System level control, System temperature |
| FAN | • 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED |
| Other Features | • 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |