Supermicro Server Board X10SDV-2C-TP8F | Intel® Pentium® D1508 | Single Socket FCBGA1667
Key Features:
• Flex ATX
• Intel® Xeon® Processor D-1508
• Single Socket FCBGA1667
• Up to 128GB of memory
• 4 SATA3 (6Gbps) ports via SoC
|
Product SKUs
| |
|---|---|
| MBD-X10SDV-2C-TP8F | • X10SDV-2C-TP8F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Flex ATX |
| Dimensions | • 9.0" x 7.25" (22.86cm x 18.42cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Pentium® Processor D1508 |
| Cores/Cache | • 2 cores, 4 threads / 3MB cache |
|
System Memory
| Memory Capacity | • Up to 128GB Registered ECC RDIMM, DDR4-2133MHz • Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots |
|---|---|
| Memory Type | • 1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM |
| DIMM Sizes | • 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | • 1.2V |
| Error Detection | •
1.2V
Error Detection
Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • System on Chip |
|---|---|
| SATA | • SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10 • RSTe |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Network Controllers | • Dual LAN with 10G SFP+ from D-1500 SoC • Quad LAN with 1GbE with Inte® I350-AM4 • Dual LAN with 1GbE with Intel® I210 • Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 4 SATA3 (6Gbps) port |
| LAN | • 1 RJ45 Dedicated IPMI LAN port • 6 1GbE LAN ports • 2 10G SFP+ LAN ports |
| USB | • 5 USB 2.0 ports (4 headers, 1 Type A) • 2 USB 3.0 ports (2 rear) |
| Video Output | • 1 VGA port |
| Serial Port/Header |
• 1 COM Port (1 header) |
| TPM |
• TPM Header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 2 PCI-E 3.0 x8 |
| M.2 | • 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110 |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash with AMI BIOS |
| BIOS Features | • PCI 3.0 • ACPI 5.0 • USB Keyboard support • Hardware BIOS Virus protection • SMBIOS 2.8 • UEFI 2.4 • RTC (Real Time Clock) Wakeup |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), 6 -fan status, Chassis intrusion header, HT, Memory, Memory Voltages, Supports system management utility, System level control, System temperature, VBAT |
| FAN | • 6x 4-pin fan headers (up to 6 fans), Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Quad Cooling Zone, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED, UID/Remote UID |
| Other Features | •
12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range |
• -40°C - 85°C (-40°F - 185°F) |
| Operating Relative Humidity Range |
• 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range | • 10% ~ 95% (non-condensin |