Supermicro Server Board X10DRC-LN4+ | Dual Socket R3 (LGA 2011) | E.E. ATX Form Factor
Key Features:
• Enhanced Extended ATX Form Factor
• Dual Socket R3 (LGA 2011)
• Intel® C612
• Up to 768GB of Memory
• Up to 22 cores € / Up to 55MB€ cache
|
Product SKUs
| |
|---|---|
| MBD-X10DRC-LN4+ | • X10DRC-LN4+ |
| Physical Stats
|
|
|---|---|
| Form Factor | • Enhanced Extended ATX Form Factor |
| Dimensions | • 13.68" x 13" (34.75cm x 33.02cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4 |
| Cores / Cache | • Up to 22 cores € / Up to 55MB€ cache |
| Note | € BIOS version 2.0 or above is required |
| ** Motherboard supports this maximum TDP. Please verify your system can thermally support | |
|
System Memory
| Memory Capacity | • Up to 768GB Registered ECC RDIMM, DDR4-2400MHz; Up to 3TB 3DS ECC LRDIMM, in 24 DIMM slots |
|---|---|
| Memory Type | • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 4GB, 8GB, 16GB, 32GB • LRDIMM: 32GB, 64GB • 3DS LRDIMM: 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors |
|
OnBoard Devices
| Chipset | • Intel® C612 | SAS | • Broadcom 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60 • 2GB Cache with optional SuperCap backup module • Supports up to 16 devices as default, more HDD devices support is also available as an option |
AHCI SATA | • SATA3 (6Gbps); RAID 0, 1, 5, 10 | SCU SATA | • SATA3 (6Gbps); RAID 0, 1, 5, 10 |
|---|---|
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Quad LAN with Intel® i350 Gigabit Ethernet Controller • Single LAN with Virtual Machine Device Queues reduce I/O overhead • Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 10 SATA3 (6Gbps) port |
| LAN | • 4 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 2 USB 2.0 ports (2 rear Type A) • 3 USB 3.0 ports (2 rear + 1 Type A) |
| Video Output | • 1 VGA port |
| Serial Port/Header |
• 2 COM Ports (1 rear, 1 header)
2 fast UART 16550 serial |
| TPM | • 1 TPM Header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 2 PCI-E 3.0 x16 |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® 5, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 6 Phase-switching voltage regulator, Chassis intrusion header, Memory Voltages |
| FAN | • 7x 4-pin fan headers (up to 7 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID |
| Other Features | • Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range |
• -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range |
• 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 5% - 95% (non-condensing) |