Supermicro Server Board X10DAC | Dual Socket R3 (LGA 2011) | E-ATX

Call for price
In stock
SKU
MB-X10DAC

Key Features:
• E-ATX
• Dual Socket R3 (LGA 2011)
• Intel® C612
• Up to 1TB of memory
• 8 SAS3 (12Gbps) via Broadcom® 3008 SW controller RAID 0, 1, 10

Supermicro Server Board X10DAC | Dual Socket R3 (LGA 2011) | E-ATX

Product SKUs
• X10DAC
Physical Stats
Form Factor • E-ATX
Dimensions • 12" x 13" (30.48cm x 33.02cm)
Processor/Cache
CPU

• Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
• Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 160W, 1 QPI up to 9.6GT/s

Cores/Cache • Up to 22 cores €  / Up to 55MB€  cache
Note €  BIOS version 2.0 or above is required 
  ** Motherboard supports this maximum TDP. Please verify your system can thermally support. 
System Memory
Memory Capacity • Up to 1TB 3DS ECC/non-ECC RDIMM, DDR4-2400MHz; Up to 2TB 3DS ECC LRDIMM, in 16 DIMM slots
Memory Type • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes • RDIMM: 4GB, 8GB, 16GB, 32GB
• LRDIMM: 32GB, 64GB
• 3DS LRDIMM: 128GB
Memory Voltage • 1.2V
Error Detection • Corrects single-bit errors
OnBoard Devices
Chipset • Intel® C612
SAS • Broadcom 3008 SAS3 (12Gbps) controller; SW RAID 0, 1, 10
AHCI SATA • SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA • SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers • Dual LAN with Intel® i210 Gigabit Ethernet ControllerSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio • RealTek ALC888 7.1 High Definition Audio with S/PDIF header
Input/Output
SATA • 10 SATA3 (6Gbps) port
LAN • 2 RJ45 Gigabit Ethernet LAN ports
USB • 5 USB 2.0 ports (2 rear + 2 headers + 1 Type A)
• 6 USB 3.0 ports (4 rear + 2 headers)
TPM • 1 TPM Header
Expansion Slots
PCI-E

• 3 PCI-E 3.0 x16
• 2 PCI-E 3.0 x8
• 1 PCI-E 2.0 x4 (in x8 slot)

System BIOS
BIOS Type

• 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features • Plug and Play (PnP)
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1
Management
Software

• NMI, SuperDoctor® 5, Watchdog

Power Configuration

• ACPI Power Management
• Power-on mode for AC power recovery

PC Health Monitoring
Voltage

• +1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 6 Phase-switching voltage regulator, Chassis intrusion header, Monitors CPU voltages, Supports system management utility

FAN

• 8x 4-pin fan headers (up to 8 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control

Temperature

• Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI, Thermal Control for 8 Fan Connectors

LED

• CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID

Other Features

• Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC

Operating Environment
Operating Temperature
Range

• 10°C - 35°C (50°F - 95°F)

Non-Operating Temperature
Range

• -40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity
Range

• 8% - 90% (non-condensing)

Non-Operating Relative Humidity Range



• 5% - 95% (non-condensing)



Copyright © 2014-present Will Jaya Inc. All rights reserved.