Supermicro Server Board H11SSW-iN | Single AMD EPYC„¢ 7000 | Proprietary Form Factor
Key Features:
• Proprietary
• Single AMD EPYC„¢ 7000-series
• Up to 2TB of Memory
• Up to 32 Cores
• System on Chip
|
Product SKUs
| |
|---|---|
| MBD-H11SSW-iN | • H11SSW-iN |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary |
| Dimensions | • 13.4" x 12.29" (34cm x 31.2cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Single AMD EPYC„¢ 7000-series Processor |
| Cores | • Up to 32 Cores |
| Chipset | • System on Chip |
|
System Memory
| Memory Capacity | • 16 DIMM slots • Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs • 8-channel memory bus |
|---|---|
| Memory Type | • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs |
| DIMM Sizes | • 8GB, 16GB, 32GB, 64GB, 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| SATA | • SATA3 (6 Gbps) |
|---|---|
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2500 BMC |
| Network Controllers | • 2x 1GbE LAN Ports via Broadcom BCM5720L • 1 Realtek RTL8211E PHY (dedicated IPMI) |
| VGA | • ASPEED AST2500 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 2 SATA3 (6 Gbps) ports |
| SATA/NVMe Hybrid | • 16 SATA3 / 4 NVMe |
| NVMe | • 12 NVMe |
| LAN | • 2 RJ45 1GbE Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 7 USB 3.0 ports (4 rear + 2 front + 1 Type A) |
| VGA | • 1 VGA port |
| Others |
• 2 COM ports (rear) • 2 SATA DOM power connectors • 1 TPM 2.0 header • 1 TPM 1.2 header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x32 Left Riser Slot |
| M.2 | • Interface: 2 PCI-E 3.0 x2 |
|
System BIOS
| |
|---|---|
| BIOS Type | • AMI 128Mb SPI Flash EEPROM |
| BIOS Features | • Plug and Play (PnP) • DMI 2.3 • PCI 2.2 • ACPI 5.1 • USB Keyboard Support • SMBIOS 3.1.1 |
|
Management
| |
|---|---|
| Software | • Super Doctor 5 |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| CPU | • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby |
| FAN | • Up to 6-fan status tachometer monitoring |
| Temperature | • Monitoring for CPU and chassis environment |
| LED | • CPU / System Overheat LED |
| Other Features | • Chassis Intrusion Detection |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 10°C to 35°C (50°F to 95°F) |
| Non-Operating Temperature Range |
• -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity Range |
• 8% to 90% (non-condensing) |
| Non-Operating Relative Humidity Range | • 5% to 95% (non-condensing) |