Supermicro Server Board H11SSL-i | Single AMD EPYC„¢ 7000 | ATX Form Factor
Key Features:
• ATX
• Single AMD EPYC„¢ 7000-series
• Up to 1TB of Memory
• Up to 32 Cores
• System on Chip
|
Product SKUs
| |
|---|---|
| MBD-H11SSL-i | • H11SSL-i |
| Physical Stats
|
|
|---|---|
| Form Factor | • ATX |
| Dimensions | • 12" x 9.6" (30.5cm x 24.4cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Single AMD EPYC„¢ 7000-series Processor |
| Cores | • Up to 32 Cores |
| Chipset | • System on Chip |
|
System Memory
| Memory Capacity | • 8 DIMM slots • Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs • 8-channel memory bus |
|---|---|
| Memory Type | • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs |
| DIMM Sizes | • 8GB, 16GB, 32GB, 64GB, 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| SATA | • SATA3 (6 Gbps) |
|---|---|
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2500 BMC |
| Network Controllers | • 2 1GbE LAN via Intel® I210 • 1 Realtek RTL8211E PHY (dedicated IPMI) |
| VGA | • ASPEED AST2500 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 16 SATA3 (6 Gbps) ports |
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 5 USB 3.0 ports (2 rear + 2 via header + 1 Type A) • 4 USB 2.0 ports (2 rear + 2 via header) |
| VGA | • 1 VGA port |
| Others |
• 1 COM port (rear) • 2 SATA DOM power connector • 1 TPM 2.0 header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 3 PCI-E 3.0 x8 |
| M.2 | • Interface: PCI-E 3.0 x4 |
|
System BIOS
| |
|---|---|
| BIOS Type | • AMI 128Mb SPI Flash EEPROM |
| BIOS Features | • Plug and Play (PnP) • DMI 2.3 • PCI 2.2 • ACPI 5.1 • USB Keyboard Support • SMBIOS 3.1.1 |
|
Management
| |
|---|---|
| Software | • Super Doctor 5 |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby |
| FAN | • Up to 7-fan status tachometer monitoring |
| Temperature | • Monitoring for CPU and chassis environment |
| LED | • CPU / System Overheat LED |
| Other Features | • Chassis Intrusion Detection |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 10°C to 35°C (50°F to 95°F) |
| Non-Operating Temperature Range |
• -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity Range |
• 8% to 90% (non-condensing) |
| Non-Operating Relative Humidity Range | • 5% to 95% (non-condensing) |