Supermicro Server Board H11SSL-C | Single AMD EPYC„¢ 7000 | ATX
Key Features:
• ATX
• Single AMD EPYC„¢ 7000-series
• Up to 1TB of Memory
• Up to 32 Cores
• System on Chip
Product SKUs
| |
---|---|
MBD-H11SSL-C | • H11SSL-C |
Physical Stats
|
|
---|---|
Form Factor | • ATX |
Dimensions | • 12" x 9.6" (30.5cm x 24.4cm) |
Processor/Chipset
| |
---|---|
CPU | • Single AMD EPYC„¢ 7000-series Processor |
Cores | • Up to 32 Cores |
Chipset | • System on Chip |
System Memory
| Memory Capacity | • 8 DIMM slots • Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs • 8-channel memory bus |
---|---|
Memory Type | • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs |
DIMM Sizes | • 8GB, 16GB, 32GB, 64GB, 128GB |
Memory Voltage | • 1.2V |
Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
OnBoard Devices
| SATA | • SATA3 (6 Gbps) | SAS | • Broadcom 3008 SAS3 (12 Gbps) controller • RAID 0, 1, 10 |
---|---|
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2500 BMC |
Network Controllers | • 2 1GbE LAN via Intel® I210 • 1 Realtek RTL8211E PHY (dedicated IPMI) |
VGA | • ASPEED AST2500 BMC |
Input/Output
| |
---|---|
SAS | • 8 SAS3 (12 Gbps) ports |
SATA | • 8 SATA3 (6 Gbps) ports |
LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
USB | •
5 USB 3.0 ports (2 rear + 2 via header + 1 Type A) • 4 USB 2.0 ports (2 rear + 2 via header) |
VGA | • 1 VGA port |
Others |
• 1 COM port (rear) • 2 SATA DOM power connector • 1 TPM 2.0 header |
Expansion Slots
| |
---|---|
PCI-E | • 3 PCI-E 3.0 x8 |
M.2 | • Interface: PCI-E 3.0 x4 |
System BIOS
| |
---|---|
BIOS Type | • AMI 128Mb SPI Flash EEPROM |
BIOS Features | • Plug and Play (PnP) • DMI 2.3 • PCI 2.2 • ACPI 5.1 • USB Keyboard Support • SMBIOS 3.1.1 |
Management
| |
---|---|
Software | • Super Doctor 5 |
Power Configuration | • ACPI Power Management |
PC Health Monitoring
| |
---|---|
CPU | • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby |
FAN | • Up to 7-fan status tachometer monitoring |
Temperature | • Monitoring for CPU and chassis environment |
LED | • CPU / System Overheat LED |
Other Features | • Chassis Intrusion Detection |
Operating Environment / Compliance
| |
---|---|
Operating Temperature Range |
• 10°C to 35°C (50°F to 95°F) |
Non-Operating Temperature Range |
• -40°C to 70°C (-40°F to 158°F) |
Operating Relative Humidity Range |
• 8% to 90% (non-condensing) |
Non-Operating Relative Humidity Range | • 5% to 95% (non-condensing) |