Supermicro Server Board A2SAP-L | Intel® Atom® E3930 | Single Socket FCBGA1296
Key Features:
• Pico-ITX 2.5" SBC
• Intel® Atom® Processor E3930
• Socket FCBGA1296
• Up to 8GB of memory
• System on Chip
|
Product SKUs
| |
|---|---|
| MBD-A2SAP-L | • A2SAP-L |
| Physical Stats
|
|
|---|---|
| Form Factor | • Pico-ITX 2.5" SBC |
| Dimensions | • 3.9" x 2.8" (9.91cm x 7.11cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Atom® Processor E3930. |
| Cores/Cache | €¢ 2 cores, 2 threads / 2MB L2 cache |
|
System Memory
| Memory Capacity | • Up to 8GB Unbuffered non-ECC SO-DIMM, DDR3-1866MHz, in 1 DIMM slot |
|---|---|
| Memory Type | • DDR3L up to 1866Mhz 8GB |
| DIMM Sizes | • 2GB, 4GB, 8GB |
| Memory Voltage | • 1.35V |
|
OnBoard Devices
| Chipset | • System on Chip |
|---|---|
| Network Controllers | • Dual LAN with Intel® Ethernet Controller I210IT |
| Audio | • ALC 888S HD Audio |
| Graphics | • Intel® HD Graphics • Dual channel 48-bit LVDS(max. resolution up to 1920x1200@60Hz), HDMI(max. resolution up to 3840x2160@30Hz) |
|
Input/Output
| |
|---|---|
| SATA | • 1 SATA3 (6Gbps) port |
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports |
| USB | • 2 USB 2.0 ports (2 headers) • 2 USB 3.0 ports (2 rear) |
| Video Output | • 1 LVDS port, 1 HDMI port • Dual channel 48-bit LVDS(max. resolution up to 1920x1200@60Hz), HDMI(max. resolution up to 3840x2160@30Hz) |
| Serial Port/Header |
• 2 COM Ports (2 headers), RS232/422/485 |
| Others |
• 1 HD Audio header (Mic-in/Headphone-out) (Note: Audio only support 0C~60C) • 1 8-bit GPIO header • 1 SMbus/5V SATA Power box header • 1 2x4-Pin 12V DC-IN power input box header(2.0mm pitch) • 1 EI/O (1 DP/HDMI, 2 PCI-E x1, 2 USB2.0, LPC, SMBus, 12Vsb 2A, 5Vsb 2.8A) (Note:A2SAP-E/-L does NOT support SATA signal) |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 Half size Mini-PCI-E (USB2.0 x 1,PCI-E Gen2 x 1) |
| M.2 | • M.2 Interface: SATA and PCI-E 2.0 x1 and USB 2.0 |
|
System BIOS
| |
|---|---|
| BIOS Type | • AMI UEFI |
|
Management
| |
|---|---|
| Software | • SuperDoctor® 5, Watchdog |
| Power Configuration | • +12V DC Power Input |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.35V, +12V, +3.3V, 3.3V standby, Memory Voltages, System level control, System temperature, VBAT, VCGI |
| FAN | • N/A |
| Temperature | • CPU thermal trip support |
| LED | • Standby alert LED |
| Other Features | • ACPI power management, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, RoHS, System level control, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• -30°C ~ 60°C (-22°F ~ 140°F) |
| Non-Operating Temperature Range |
• -40°C - 85°C (-40°F - 185°F) |
| Operating Relative Humidity Range |
• 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 10% ~ 95% (non-condensing) |