Supermicro Mid-Tower SuperServer SYS-7034L-iB

Call for price

In stock

SKU

SYS-7034L-iB

Key Features:
• Dual Intel® Dual Core Xeon® Processor
• Up to 16GB DDR2 400 SDRAM
• Intel® 82573V and 82573L Gigabit Ethernet Controllers
• 1 x Drive Carrier for up to 4 HDD
• 450W Power Supply

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Supermicro SuperServer 7034L-iB

Product SKU
SYS-7034L-i	• SuperServer 7034L-i (Beige)
SYS-7034L-iB	• SuperServer 7034L-iB (Black)

Product SKU
SYS-7034L-i	• A+ Server 7034L-i (Beige)
SYS-7034L-iB	• A+ Server 7034L-i (Black)

Motherboard
	• Super X6DLP-EG2

Processor/Cache
CPU	• Dual 479-pin FC-mPGA4 Sockets • Dual Core Xeon Processor LV (Low Voltage / Low Power) CPUs (31W) up to 2.5GHz • (2x1MB) L2 Integrated Advanced Transfer Cache
System Bus	• 667 MHz system bus
OS Software	• Supports 32-bit Operating Systems

System Memory
Memory Capacity	• Eight 240-pin DIMM slots • Supports up to 16 GB DDR2 400 MHz memory • Dual channel memory bus • Memory must be populated in pairs
Memory Type	• DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	• 256 MB, 512 MB, 1GB, 2GB
Memory Voltage	• 1.8V only
Error Detection	• Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 Single Device Data Correction (SDDC)

On-Board Devices
Chipset	• Intel® E7520 chipset • MCH + 6300ESB + 82573V/L
SATA	• 6300ESB SATA Controller (2x Drive support) • 2x SATA Ports • SATA HostRAID 0, 1 support
IPMI	• Support for Intelligent Platform Management Interface v. 2.0 • (Optional: AOC-IPMI20-E)
Network Controllers	• Intel® 82573V and 82573L Single Port Gigabit Controllers • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics	• ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O	• Winbond 83627HF chip
Clock Generator	• ICS9DB108BFT chip

Expansion Slots
PCI-Express	• 1 (x8) PCI-E slot
PCI-X	• 2x 64-bit 66MHz PCI-X (3.3V) slots
PCI	• 1x 32-bit 33MHz PCI (5V) slot

Input/Output
Serial ATA	• Two Serial ATA ports • Two SATA hard drives supported
IDE	• Dual EIDE channels support up to four UDMA / IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	• 1 Floppy controller; 1.44 MB support
LAN	• 2x RJ45 LAN ports
USB	• 2x USB rear ports • 1x USB internal headers for 2 ports • USB 2.0 Compliant / 1.1 Compliant
VGA	• 1x VGA port
Keyboard/Mouse	• PS/2 keyboard and mouse ports
Serial Ports	• 1 Fast UART 16550 serial port • 1 header
Parallel Port	• 1 ECP / EEP parallel port header

System BIOS
BIOS Type	• IOS BIOS Type 8Mb Flash EEPROM with AMI® BIOS • SST
BIOS Features	• Plug and Play (PnP) • SMBIOS 2.3 • APM 1.2 • DMI 2.3 • DMI 2.3 PCI 2.2 • ACPI 1.0 • BIOS Rescue hot keys • USB Keyboard support • Hardware BIOS Virus protection

Chassis
Form Factor	• Mid-Tower
Model	• SC733i-450

Dimension and Weight
Height	• 7" (178 mm)
Width	• 16.8" (427 mm)
Depth	• 20.9" (531 mm)
Gross Weight	• 39 lbs (17.7 kg)
Available Colors	• Beige, Black

Front Panel
Buttons	• Power On/Off button • System Reset button
LEDs	• Power LED • Hard drive activity LED • Network activity LED • System Overheat LED
Ports	• 2x Front side USB ports (USB 2.0 ready)

Drive Bays
Drive Carrier	• 1x IDE Drive Carrier (capacity for up to 4 Hard Disk Drives)
Peripheral Bay	• 2x 5.25" peripheral drive bay • 1x 3.5" bay for floppy drive

Peripheral Drives
Floppy	• TEAC 3.5" 1.44MB Floppy Drive

System Cooling
Fans	• 1x 12cm exhaust fan (thermal control) • 1x 9cm cooling fan (thermal control)

Power Supply
	450W low-noise AC power supply with redundant cooling feature (with PFC)
AC Voltage	• 100 - 240V, 50/60Hz, 10 Amp
DC Output	• 5V + 3.3V ‰¤ 160W • 12V + 5V + 3.3V ‰¤ 430W
+5V	• 30.0 Amp
+5V standby	• 2.0 Amp
+12V	• 34.0 Amp
-12V	• 1.0 Amp
+3.3V	• 30.0 Amp

PC Health Monitoring
CPU	• Monitors for CPU Cores (+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT) • CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.2V-1.3V
FAN	• Total of six 4-pin fan headers • 6 fans with status tachometer monitoring • Status monitor with firmware/software on/off control • Support both 4-pin and 3-pin fans • Low noise fan speed control • Pulse Width Modulated (PWM) fan connector
Temperature	• Monitoring for CPU and chassis, environment • CPU thermal trip support • Thermal Control for 6x Fan Connectors • I2C temperature sensing logic • Thermal Monitor 2 (TM2) support
LED	• CPU / System Overheat LED • CPU / System Overheat LED +5V Standby alert LED • Suspend-state indicator LED
Other Features	• Chassis intrusion detection • Chassis intrusion header • SDDC support