Supermicro Mid-Tower SuperServer SYS-5037A-i
Key Features:
• Single socket R (LGA 2011) Intel® Xeon® processor
• Up to 512GB memory; 8x DIMM slots
• 4 USB 3.0 and 14 USB 2.0 ports
• 4x 3.5" SATA3 HDD bays,
• 900W Gold Level Power Supply
Product SKU
| |
---|---|
SuperWorkstation | • SYS-5037A-i (Black) |
Motherboard
| |
---|---|
• Super X9SRA |
Processor/Cache
|
|
---|---|
CPU | • Socket R (LGA 2011) • Intel® Xeon® processor E5-2600/1600 and E5-2600/1600 v2 family€ |
Note | • € BIOS version 3.0 or above is required |
System Memory
| |
---|---|
Memory Capacity | • 8x 240-pin DDR3 DIMM slots • Up to 512GB DDR3 ECC LRDIMM • Up to 256GB DDR3 ECC RDIMM • Up to 64GB DDR3 ECC/non-ECC UDIMM |
Memory Type | • 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM |
Memory Voltage | • 1.5 V, 1.35 V |
Error Detection |
• Corrects single-bit errors |
On-Board Devices
| Chipset | • Intel® C602 Chipset |
---|---|
SATA | • 2 SATA3 (6Gbps) and 4 SATA2 (3Gbps) • RAID 0, 1, 5, 10 |
Network Controllers | • Intel® 82579LM and 82574L, 2x Gigabit LAN ports • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Audio | • RealTek ALC889 7.1 High Definition Audio with S/PDIF header |
TPM |
• 20pin Header v1.2 |
Input/Output
| Serial ATA | • 2 SATA 3.0 ports (6Gbps) • 4 SATA 2.0 ports (3Gbps) |
SCU | • 4 SATA 2.0 ports (3Gbps) via SCU | LAN | • 2x RJ45 LAN ports |
---|---|
USB | • 4 USB 3.0 (5Gbps; 2 rear, 2 via headers) • 14 USB 2.0 (8 rear, 6 via headers) • Total 4 USB 3.0 and 14 USB 2.0 |
Audio | • Line-in / Line-out / Microphone Ports |
Serial Port / Header | • 2x Fast UART 16550 serial port (one header and one rear port) |
Expansion Slots
| |
---|---|
PCI-Express | • 2 (x16) PCI-E 3.0 slots • 1 (x4) PCI-E 3.0 in x8 slot • 1 (x4) PCI-E 2.0 in x8 slot • 1 PCI 32-bit slot |
System BIOS
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS | BIOS Features |
• DMI 2.3 • PCI 2.3 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 |
---|
Chassis
| |
---|---|
Form Factor | • Mid-Tower |
Model | • CSE-732D4-903B |
Dimension and Weight
| |
---|---|
Height | • 16.7" (424 mm) |
Width | • 7.6" (193 mm) |
Depth | • 20.68" (525.3 mm) |
Gross Weight | • 35.5 lbs (16.10 kg) |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons | • Power On/Off button |
LEDs | • Power LED |
Ports |
• 2x Front side USB ports (USB 2.0 ready) |
Drive Bays
| |
---|---|
Hard Drive |
• 4x 3.5" SATA3 HDD Bays |
System Cooling
| |
---|---|
Fans | • 1x 12cm rear exhaust fan |
Power Supply
| |
---|---|
900W AC multi output power supply | |
AC Voltage | • 100-240 V, 50-60 Hz, 10-6 Amp |
+5V Standby |
• 3 Amp |
+12V1 | • 25 Amp |
+12V2 | • 25 Amp |
+12V3 | • 25 Amp |
+12V4 | • 25 Amp |
+5V | • 25 Amp |
+3.3V | • 25 Amp |
-12V | • 0.5 Amp |
Certification | • Gold Level |
Note | • Max. continuous combined load on +3.3V and +5V output shall not exceed 155W. • Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W. |
PC Health Monitoring
| |
---|---|
CPU |
• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages |
Fan | • Total of 5 fan headers supporting up to 5 fans |
Temperature | • Monitoring for CPU and chassis environment |
Operating Environment/Compliance
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. | • Operating Temperature:
10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |