Supermicro BigTwin SuperServer SYS-2029BZ-HNR (Complete System Only)
Key Features:
• Four hot-pluggable systems (nodes) in a 2U form factor
• Supports Intel® Xeon® Scalable Processors,
• Up to 3TB of memory
• 6 Hot-swap 2.5" NVMe drive bays
• 2 M.2 SATA3 or NVMe support
• 16 Heavy duty 40x56mm fans with optimal fan speed
control (4 fans per node)
• 2600W Redundant Power Supplies Titanium Level (96%)
Product SKU
| |
---|---|
SYS-2029BZ-HNR | • SuperServer 2029BZ-HNR (Black) |
Motherboard
| |
---|---|
• Super X11DPT-BH |
Processor/Cache
|
|
---|---|
CPU | • Dual Socket P (LGA 3647) • Intel® Xeon® Scalable Processors, 3 UPI up to 10.4GT/s • Support CPU TDP 70-205W* |
Cores | • Up to 28 Cores with Intel® HT Technology |
Note | * 200W/205W CPUs are supported under certain configurations. Please contact Will Jaya Technical Support for additional information about specialized system optimization |
System Memory
| |
---|---|
Memory Capacity | • 24 DIMM slots • Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz |
Memory Type | • 2666/2400/2133MHz ECC DDR4 SDRAM |
On-Board Devices
| Chipset | • Intel® C621 chipset |
---|---|
Network | • Must bundle with at least one SIOM network card |
IPMI | •
Support for Intelligent Platform Management Interface v.2.0 |
Video |
• ASPEED AST2500 BMC |
Input/Output (per node)
| LAN | • 1 RJ45 Dedicated IPMI LAN port | USB | • 2 USB 3.0 ports (rear) | Video | • 1 VGA port |
---|---|
DOM | • 1 SuperDOM (Disk on Module) port |
Others | • M.2 and SATA DOM for boot drive only |
System BIOS
| |
---|---|
BIOS Type |
• AMI 32Mb SPI Flash ROM |
Management
| |
---|---|
Software | • Intel® Node Manager |
Power Configuration |
• ACPI / APM Power Management |
PC Health Monitoring
| CPU | • Monitors for CPU Cores, Chipset Voltages, Memory • 4+1 Phase-switching voltage regulator |
FAN | • Fans with tachometer monitoring • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • Thermal Control for fan connectors |
---|
Chassis
| |
---|---|
Form Factor | • 2U Rackmount |
Model | • CSE-217BHQ+-R2K60FP |
Dimension and Weight
| |
---|---|
Height | • 3.47" (88mm) |
Width | • 17.6" (447mm) |
Depth | • 28.75" (730mm) |
Gross Weight | • 54.5 lbs (24.7 kg) |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons | • Power On/Off button |
LEDs |
• Power status LED |
Expansion Slots (per node)
| |
---|---|
PCI-Express | • 2 PCI-E 3.0 (x16) Low-profile slots |
Drive Bays/Storage (per node)
| |
---|---|
Hot-swap | • 6 Hot-swap 2.5" NVMe drive bays |
M.2 |
• 2 M.2 NVMe or SATA (2240/2260/2280) via optional AOC-SMG3-2H8M2-B |
System Cooling
| |
---|---|
Fans | • 16 Heavy duty 40x56mm PWM fans with air shroud (4 fans per node) |
Power Supply
| |
---|---|
2600W Redundant Power Supplies with PMBus | |
Total Output Power | • 2600W |
Dimension
(W x H x L) |
• 45 x 40 x 480 mm |
Input | • 208-240Vac/15-12.5A / 50-60Hz • 220-240Vdc/13.5-12.5A (CQC only) |
+12V |
• Max: 216.6A / Min: 0A |
12Vsb | • Max: 4.5A / Min: 0A |
Output Type | • Gold Finger (4HP+2LP-20S output connector) |
Certification | • Titanium Level |
Operating Environment
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. |
• Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |