Supermicro BigTwin SuperServer SYS-2028BT-HNC1R+ (Complete System Only)

Call for price

In stock

SKU

SYS-2028BT-HNC1R+

Key Features:
• Four hot-pluggable systems (nodes) in a 2U form factor
• Supports Intel® Xeon® processor E5-2600 v4/v3
• Up to 3TB of memory
• 6 Hot-swap 2.5" SAS3 drive bays
• 4 heavy duty 8cm PWM fans with air shroud
• 2200W Redundant Power Supplies Titanium Level

Due to the complexity of integration, this product is sold as a completely assembled system only (with minimum 2 CPUs and 4 DIMMs). Please contact your Will Jaya sales rep for special requirements.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Supermicro BigTwin SuperServer SYS-2028BT-HNC1R+ (Complete System Only)

Product SKU
SYS-2028BT-HNC1R+	• SuperServer 2028BT-HNC1R+ (Black)

Motherboard
	• Super X10DRT-B+

Processor/Cache (per node)
CPU	• Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) * • Dual Socket R3 (LGA 2011)
Cores/Cache	• Up to 22 Cores€ / Up to 55MB€ Cache
System Bus	• QPI up to 9.6 GT/s
Notes	• € BIOS version 2.0 or above is required
	* Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory (per node)
Memory Capacity	• 24x 288-pin DDR4 DIMM slots • Up to 3TB€ ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type	• 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	• RDIMM: 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB • 3DS LRDIMM: 128GB
Memory Voltage	• 1.2 V
Error Detection	• Corrects single-bit errors

On-Board Devices (per node)
Chipset	• Intel® C612 chipset
SAS	• SAS3 (12Gbps) via Broadcom 3108; HW RAID 0, 1, 5, 6, 10, 50, 60
IPMI	• Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC
Network	•Must bundle with at least one SIOM network card
Video	• ASPEED AST2400 BMC

Input/Output (per node)
SAS	• 6 SAS3 (12Gbps) ports
LAN	• 1 RJ45 Dedicated IPMI LAN port
USB	• 2 USB 3.0 ports (rear)
Video	• 1 VGA port
Others	• M.2 and SATA DOM for boot drive only

Chassis
Form Factor	• 2U Rackmount
Model	• CSE-217BHQ+-R2K22BP

Dimension and Weight
Height	• 3.47" (88mm)
Width	• 17.6" (447mm)
Depth	• 28.75" (730mm)
Gross Weight	• 85 lbs (38.6kg)
Available Colors	• Black

Front Panel
Buttons	• Power On/Off button • UID button
LEDs	• Power status LED • HDD activity LED • 2 Network activity LEDs • Universal Information (UID) LED

Expansion Slots (per node)
PCI-Express	• 1 PCI-E 3.0 (x16) Low-profile slot • 1 SIOM card (must bundle with network card)

Drive Bays (per node)
Hot-swap	• 6 Hot-swap 2.5" SAS3 drive bays or 4 NVMe + 2 SAS3 Hot-swap 2.5"

System Cooling
Fans	• 4 heavy duty 8cm PWM fans with air shroud

Power Supply
	2200W Redundant Power Supplies with PMBus
Total Output Power	• 1200W/1800W/1980W/2090/2200W
Dimension (W x H x L)	• 45 x 40 x 480 mm
Input	• 1200W: 100-127Vac / 50-60Hz • 1800W: 200-220Vac / 50-60Hz • 1980W: 220-230Vac / 50-60Hz • 2090W: 230-240Vac / 50-60Hz • 2090W: 180-220Vac (for UL/cUL only) • 2200W: 220-240Vac (for UL/cUL only) • 2090W: 230-240Vdc (for CCC only)
+12V	• Max: 100A / Min: 0A (100-127Vac) • Max: 150A / Min: 0A (200-220Vac) • Max: 165A / Min: 0A (220-230Vac) • Max: 174.17A / Min: 0A (230-240Vac) • Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) • Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) • Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb	• Max: 2.1A / Min: 0A
Output Type	• Gold Finger
Certification	• Titanium Level

Operating Environment
RoHS	• 128Mb SPI Flash EEPROM with AMI BIOS
Environmental Spec.	• Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing)