Supermicro 4U Tower SuperServer SYS-7048R-TR
Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor
• Up to 2TB ECC 3DS LRDIMM; 16x DIMM slots
• 3 PCI-E 3.0 x16, 3 PCI-E 3.0 x8 slots
• Intel® i350 Dual port GbE LAN
• 8x 3.5" Hot-swap SATA3 HDD Bays
• 920W Redundant Power Supplies Platinum Level (94%)
Product SKU
| |
---|---|
SYS-7048R-TR | • SuperServer 7048R-TR (Black) |
Motherboard
| |
---|---|
• Super X10DRi |
Processor/Cache
|
|
---|---|
CPU | • Intel® Xeon® processor E5-2600 v4 / v3 family (up to 145W TDP) • Dual Socket R3 (LGA 2011) |
Cores/Cache | • Up to 22 Cores / Up to 55MB Cache |
System Bus | • QPI up to 9.6 GT/s |
BIOS version 2.0 or above is required | |
Note | Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory
| |
---|---|
Memory Capaity | • 16x 288-pin DDR4 DIMM slots • Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type | • 2400 /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | • RDIMM: 32GB, 16GB, 8GB, 4GB |
Memory Voltage | • 1.2 V |
Error Detection |
• Corrects single-bit errors |
On-Board Devices
| Chipset | • Intel® C612 chipset |
---|---|
SATA | • SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
Network Controllers | • Intel® i350 Dual Port Gigabit Ethernet |
Videos |
• ##ASPEED AST2400 BMC |
Input/Output
| SATA | • 8x SATA3 (6Gbps) ports • 2x SATA3 powered ports that support SATA DOM |
LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
USB | • Rear USB: 2x USB 3.0 + 2x USB 2.0
• Front USB: 2x USB 2.0 • USB Header: 2x 3.0, 2x 2.0, 1x Type A |
---|---|
Video | • 1x VGA port |
Serial Port Header | • 1x COM/Serial |
System Bios
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI® BIOS |
---|---|
BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
Management
| Software | • SuperDoctor® 5 • Watch Dog • NMI, SPM, SUM • IPMI 2.0 • Intel Node Manager |
---|---|
Power Configuration | • ACPI / APM Power Management • Power-on mode for AC power recovery |
Chassis
| |
---|---|
Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit |
Model | • CSE-745TQ-R920B |
Dimension and Weight
| |
---|---|
Height | • 17.2" (437mm) |
Width | • 7.0" (178mm) |
Depth | • 25.5" (648mm) |
Gross Weight | • 73.5 lbs (33.6 kg) |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons |
• Power On/Off button |
LEDs | •
Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power Fail LED |
Ports | • 2x USB Ports |
Expansion Slots
| |
---|---|
PCI-Express |
• 3x PCI-E 3.0 x16 (Full-height, Full-length) |
Drive Bays
| |
---|---|
Hot-swap |
• 8x 3.5" Hot-swap SAS/SATA Drive Trays |
Peripheral Bay(s) [90o Rotatable] | • 2x 5.25" Peripheral Drive Bays • 1x 5.25" Bay that fits 3.5" bay devices |
SAS/SATA Backplane
| |
---|---|
• SAS / SATA Hard Drive Backplane w/AMI MG9072 |
System Cooling
| |
---|---|
Fans |
• 3x 8cm hot-swap redundant PWM cooling fans |
Power Supply with Power Distributor
| |
---|---|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | |
AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
DC Output |
• 4 Amp @ +5V standby • 75 Amp @ +12V |
Certification | • Platinum Certified |
PC Health Monitoring
| |
---|---|
CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. • 6-Phase-switching voltage regulator |
FAN | • Total of eight fan headers supporting up to 8 fans • 8x fans with tachometer status monitoring • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • Thermal Monitor 2 (TM2) support • PECI |
LED | • CPU / System Overheat LED • Suspend static indicator LED • UID/Remote LED |
Other Features | • Chassis intrusion detection • Chassis intrusion header |
Operating Environment
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. | • Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |