Supermicro 4U Rackmountable Tower SYS-7046T-NTR+ | SuperServer
Key Features:
• Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
• 288GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM
/ 48GB Unbuffered DIMM
• 2 (x8) PCI-E 2.0 (1 in x16 slot), 1 (x4) PCI-E (in x 8 slot), 1x 64-bit
133MHz PCI-X, 2x 64-bit 133/100MHz PCI-X & 1 UIO slot
• Intel® 82576 Dual-port Gigabit Ethernet Controller
• 8x 3.5" Hot-swap Drives Trays 6x SATA Hard Drives Supported
• 800W High Efficiency Redundant Power Supply
• Tower or Rackmount
Supermicro Super X8DTN+ Server Motherboard and SC745TQ-R800B 4U Rackmountable Tower Chassis.
Product SKU
| |
---|---|
SYS-7046T-NTR+ | • SuperServer 7046T-H6R (Black) |
Motherboard
| |
---|---|
Super X8DTN+ |
Processor/Cache
| |
---|---|
CPU | • Dual 1366-pin LGA Sockets • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: • Intel® Xeon®Processor 5600 Series (Westmere) • Intel® Xeon®Processor 5500 Series (Nehalem-EP) |
QPI | • up to 6.4 GT/s |
System Memory
| |
---|---|
Memory Capacity | • 18x 240-pin DIMM slots • Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory • Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory • Memory Mirroring supported |
Memory Type |
• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 1GB, 2GB, 4GB , 8GB , 16GB |
Memory Voltage | • 1.5 V, 1.35 V |
Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices
| Chipset | • Intel® 5520 (Tylersburg) chipset • ICH10R + 2x IOH-36D |
---|---|
SATA | • Intel ICH10R SATA 3.0Gbps Controller • RAID 0, 1, 5, 10 support |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • 200-pin IPMI slot (SIMLP) • (Optional: AOC-SIMLP-B(+)) • (Optional: AOC-SIMLP-3(+)) with 3rd LAN support |
Network Controller |
• Intel® 82576 Dual-Port Gigabit Ethernet Controller |
Graphics | • ATI ES1000 controller with 32 MB of video memory |
Super I/O | • Winbond 83627HF chip |
Expansion SLot
| |
---|---|
PCI-Express | • 2 (x8) PCI-E slots (1 in x16 slot) • 1 (x4) PCI-E slot (in x8 slot) |
PCI-X | • 1x 64-bit 133MHz PCI-X (3.3V) slots • 2x 64-bit 133/100MHz PCI-X (3.3V) slots |
UIO | • 1 UIO slot (PCI-E 2.0 x8 slot) • AOC Compatibility Matrix |
Input/Output
| |
---|---|
Serial ATA | • Six Serial ATA ports |
IDE | • Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card |
Floppy | • 1 Floppy controller; 1.44 MB |
LAN | • 2x RJ45 LAN ports |
USB | • 2x USB rear ports |
VGA | • 1x VGA Port |
Keyboard/Mouse | • PS/2 keyboard and mouse ports |
Serial Port/Header | • 1 Fast UART 16550 serial port
|
Chassis
| |
---|---|
Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit (CSE-PT26) |
Model | • SC745TQ-R800B |
Dimension and Weight
| |
---|---|
Height | • 17.2" (437mm) |
Width | • 7.0" (178mm) |
Depth | • 25.5" (648mm) |
Gross Weight | • 63 lbs (28.6kg) |
Available Color | • Black |
Front Panel
| |
---|---|
Buttons |
• Power On/Off button |
LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power Fail LED |
Ports | • 2x USB Ports |
Drive Bays
| |
---|---|
Hot-swap |
• 8x Hot-swap Drive Bays |
Peripheral Bay(s) | • 2x 5.25" Peripheral Drive Bay • 1x 5.25" Bay For 3.5" Device |
SAS/SATA Backplane
| |
---|---|
• SAS / SATA Backplane w/ Enclosure Management |
System Cooling
| |
---|---|
Fans |
• 3x 5000 RPM Hot-Swappable Cooling Fans |
Shroud | • 1x Air Shroud |
Power Supply and Distributor
| |
---|---|
800W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | |
AC Voltage | • 100 - 240V, 50-60Hz, 10-4 Amp |
+5V standby | • 4 Amp |
+12V | • 66 Amp |
With Power Distributor |
• +5V: 30 Amp • +3.3V: 24 Amp • -12V: 0.6 Amp |
System Bios
| |
---|---|
Bios Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
Bios Features | • Plug and Play (PnP) • PCI 2.2 • ACPI up to 3.0 • USB Keyboard support |
PC Health Monitoring
| |
---|---|
CPU |
• Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages. |
FAN | • Total of eight fan headers supporting up to 8 fans • Eight 4-pin fan headers • 8x fans with tachometer status monitoring • Support 3-pin fans (w/o speed control) • Low noise fan speed control |
Temperature | • Monitoring for CPU and chassis environment • Thermal Control for 8x fan connectors • PECI |
Other Features | • Chassis intrusion detection • Chassis intrusion header |
Operating Environment / Compliance
| |
---|---|
RoHS | • RoHS Compliant |
Environmental Spec. |
• Operating Temperature: 10°C to 35°C (50°F to 95°F)
|