Supermicro 4U Rackmountable Tower SYS-7045A-CTB | SuperServer
Key Features:
• Whisper Quiet Workstation (28dB) with High-end Graphics Support
• Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1333 /
1066 MHz FSB
• Up to 48GB 667/533MHZ DDR2 ECC Register SDRAM
• 1 (x16) PCI-E , 1 (x4) PCI-E (using x16 slot), 2x PCI-X
133/100MHz, 2x PCI 33MHz slots
• Intel® Dual 82573V/L Gigabit Ethernet Controller
• 6x 3.5" Hot-swap SATA Drive Bays
• 865W Low-Noise High Efficiency Power Supply
• Tower or Rackmount
• PWM Fan Speed Control
Supermicro Super X7DCA-i Server Motherboard and SC743TQ-865-SQ 4U Rackmountable Tower Chassis.
Product SKU
| |
---|---|
SYS-7045A-CTB | • SuperServer 7045A-CTB (Black) |
Motherboard
| |
---|---|
Super X7DCA-i |
Processor/Cache
| |
---|---|
CPU | • Dual 771-pin LGA Sockets • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: • Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz • Dual-Core Intel® Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz |
System Bus | • 1333 / 1066 MHz system bus |
OS Software | • Supports 64-bit Operating Systems • Supports 32-bit Operating Systems |
System Memory
| |
---|---|
Memory Capacity | • Six 240-pin DIMM slots • Supports up to 48GB 667/533MHz DDR2 ECC Register memory • Memory must be populated in pairs |
Memory Type |
• 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 512 MB, 1GB, 2GB, 4GB , 8GB** |
Memory Voltage | • 1.8 V |
Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
On-Board Devices
| |
---|---|
Chipset | • Intel® 5100 (San Clemente) chipset |
SATA | • Intel ICH9R SB SATAII Controller |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 Note: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot |
Network Controllers | • Intel® Dual 82573V/L Gigabit Ethernet Controller |
Audio | • High Definition 7.1 Channel Audio |
Super I/O | • Winbond 83627DHG chip |
Clock Generator | • CK505 chip |
Expansion SLot
| |
---|---|
PCI-Express | • 1 (x16) PCI-E slot • 1 (x4) PCI-E (using x16) slot |
PCI-X | • 2x 64-bit 133/100MHz PCI-X (3.3V) slots |
PCI | • 2x 32-bit 33MHz PCI (5V) slots |
Input/Output
| |
---|---|
Serial ATA | • Six Serial ATA ports |
IDE | • Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card |
LAN | • 2x RJ45 LAN ports |
USB | • 4x USB rear ports |
Audio | • High Definition 7.1 Channel Audio |
Keyboard/Mouse | • PS/2 keyboard and mouse ports |
Serial Port/Header | • 1 Fast UART 16550 serial port |
Parallel Port | • 1 ECP / EEP parallel port
|
Chassis
| |
---|---|
Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit (CSE-PT26) |
Model | • SC743TQ-865-SQ |
Dimension and Weight
| |
---|---|
Height | • 17.2" (437mm) |
Width | • 7.0" (178mm) |
Depth | • 25.5" (648mm) |
Gross Weight | • 63 lbs (28.6kg) |
Available Color | • Black |
Front Panel
| |
---|---|
Buttons |
• Power On/Off button |
LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED |
Ports | • 2x USB Ports |
Drive Bays
| |
---|---|
Hot-swap |
• 6x SATA Hot-swap Drives |
Peripheral Bay(s) [90oRotatable] |
• 3x 5.25" Peripheral Drive Bays |
SATA Backplane
| |
---|---|
• SC743 SATA Backplane w/ Enclosure Management |
System Cooling
| |
---|---|
Fans |
• 2x 8cm Hot-swappable PWM Cooling Fans |
Power Supply
| |
---|---|
865W AC power supply (cooling-redundant) w/ PFC | |
AC Voltage | • 100 - 240V, 50-60Hz, 12-6 Amp |
+5V standby | • 6.5 Amp |
+12V | • 70 Amp |
+5V | • 30 Amp |
+3.3V | • 30 Amp |
-12V | • 1 Amp |
Certification | • Certified |
PC Health Monitoring
| |
---|---|
CPU |
• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN | • Eight 4-pin fans • 8x fans with tachometer status monitoring • Status monitor for speed control • Status monitor for on/off control • Support 3-pin fans (w/o speed control) • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • PSU I2C temperature sensing logic • PECI • Thermal Monitor 2 (TM2) support |
LED | • CPU / System Overheat LED • Suspend-state indicator LED • +5V Standby alert LED |
Other Features | • Chassis intrusion detection • Chassis intrusion header • SDDC Support |
System Bios
| |
---|---|
Bios Type | • 8Mb Flash EEPROM with Phoenix® BIOS |
Bios Features | • Plug and Play (PnP) |
Operating Environment / Compliance
| |
---|---|
RoHS | • RoHS Compliant 6/6, Pb Free |
Environmental Spec. |
• Operating Temperature: 10°C to 35°C (50°F to 95°F) |