Supermicro 4U Rackmountable Tower SYS-7045A-3 | SuperServer
Key Features:
• Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 667 /
1066 / 1333 MHz FSB
• Up to 32GB 667/533MHz DDR2 ECC FB-DIMM (Fully
Buffered DIMM)
• 1 (x16) & 1 (x4 in x16) PCI-Express, 2x 64-bit 133/100MHz
PCI-X, 1x 64-bit 100MHz PCI-X, 1x 32-bit PCI 33MHz
• Intel® (ESB2/Gilgal) 82563 Dual-port Gigabit Ethernet
Controller
• Zero Channel RAID Support
• 8x 3.5" Hot-swap SAS/SATA Drive Bays
• 645W Low-Noise Power Supply
• Tower or Rackmount
using Supermicro Super X7DA3 Server Motherboard and SC743TQ-645 4U Rackmountable Tower Chassis.
Product SKU
| |
---|---|
SYS-7045A-3 | • SuperServer 7045A-3 (Beige) |
SYS-7045A-3B | • SuperServer 7045A-3B (Black) |
Motherboard
| |
---|---|
Super X7DA3 |
Processor/Cache
| |
---|---|
CPU | • Dual 771-pin LGA Sockets • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: • Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz • Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor) up to 3.40 GHz |
System Bus | • 1333 / 1066 / 667 MHz system bus |
OS Software | • Supports 64-bit Operating Systems • Supports 32-bit Operating Systems |
System Memory
| |
---|---|
Memory Capacity | • Eight 240-pin DIMM slots • Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory • Dual branch memory bus • Memory must be populated in pairs • Memory Mirroring supported |
Memory Type |
• 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 512 MB, 1GB, 2GB, 4GB |
Memory Voltage | • 1.8 V • 1.5V(AMB) |
Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices
| |
---|---|
Chipset | • Intel® 5000X (GreenCreek) chipset |
SAS | • Adaptec AIC-9410W Serial-Attached SCSI (SAS) Controller |
RAID | • Support for Zero-Channel RAID |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 Note: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot |
Network Controllers | • Intel® 82563EB Dual-Port Gigabit Ethernet Controller |
Super I/O | • Winbond 83627DHG chip |
Expansion Slot
| |
---|---|
PCI-Express | • 1 (x16) PCI-E slot • 1 (x4) PCI-E (using x16) slot |
PCI-X | • 2x 64-bit 133/100MHz PCI-X (3.3V) slots • 1x 64-bit 100MHz PCI-X (3.3V) slot |
PCI | • 1x 32-bit 33MHz PCI (5V) slot |
Input/Output
| |
---|---|
IDE | • Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card |
LAN | • 2x RJ45 LAN ports |
USB | • 4x USB rear ports |
Audio | • AC97 Audio |
Keyboard/Mouse | • PS/2 keyboard and mouse ports |
Serial Port/Header | • 1 Fast UART 16550 serial port |
Parallel Port | • 1 ECP / EEP parallel port
|
Chassis
| |
---|---|
Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit (CSE-PT26) |
Model | • SC743TQ-645 |
Dimension and Weight
| |
---|---|
Height | • Tower: 17.2" (437mm) / Rackmount: 7.0" (178mm) |
Width | • Towre: 7.0" (178mm) / Rackmount: 17.2" (437mm) |
Depth | • 25.5" (648mm) |
Gross Weight | • 63 lbs (28.6kg) |
Available Color | • Beige / Black |
Front Panel
| |
---|---|
Buttons |
• Power On/Off button |
LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power Fail LED |
Ports | • 2x USB Ports |
Drive Bays
| |
---|---|
Hot-swap |
• 8x SAS Hot-swap Drives |
Peripheral Bay(s) [90oRotatable] |
• 3x 5.25" Peripheral Drive Bays |
SAS/SATA Backplane
| |
---|---|
• SC743 SAS / SATA Backplane w/ Enclosure Management |
System Cooling
| |
---|---|
Fans |
• 4x 5000 RPM Hot-swappable PWM Cooling Fans |
Power Supply
| |
---|---|
645W Low-Noise AC power supply with PFC [ 24-pin, (4-pin, 8-pin) = 12V ] | |
AC Voltage | • 100 - 240V, 50 - 60Hz, 11 - 5Amp |
DC Output | • 5V + 3.3V ‰¤ 160W |
+5V | • 30.0 Amp |
+5V standby | • 4.0 Amp |
+12V | • 46.0 Amp |
-12V | • 0.6 Amp |
+3.3V | • 30 Amp |
PC Health Monitoring
| |
---|---|
CPU |
• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN | • Total of eight 4-pin fans • 8x fans with status monitoring • Status monitor for speed control • Status monitor for on/off control • Support 3-pin fans (w/o speed control) • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • PSU I2C temperature sensing logic • PECI • Thermal Monitor 2 (TM2) support |
LED | • CPU / System Overheat LED • Suspend-state indicator LED • +5V Standby alert LED |
Other Features | • Chassis intrusion detection • Chassis intrusion header • SDDC Support |
System Bios
| |
---|---|
Bios Type | • 8Mb Flash EEPROM with Phoenix® BIOS |
Bios Features | • Plug and Play (PnP) |
Operating Environment / Compliance
| |
---|---|
RoHS | • RoHS Compliant 6/6, Pb Free |
Environmental Spec. |
• Operating Temperature: 10°C to 35°C (50°F to 95°F) |