Supermicro 4U Rackmountable Tower SYS-7044H-TB | SuperServer
Key Features:
• Dual Intel® 64-bit Xeon® Support up to 3.60 GHz
• Up to 16GB DDR 333MHz SDRAM (or) Up to 32GB
DDR 266MHz SDRAM
• 2 (x8) PCI-Express, 1x 64-bit 133MHz PCI-X, 2x
64-bit 100MHz PCI-X, 1x 32-bit 33MHz PCI
• Dual Intel® 82541GI Gigabit Ethernet Controllers
• Zero Channel RAID Support
• 8x 3.5" Hot-swap SATA Drive Bays
• 650W Redundant-Cooling Power Supply
• Tower or Rackmount
• 100% Cooling Redundancy
Supermicro Super X6DHT-G Server Motherboard and SC743T-650 4U Rackmountable Tower Chassis.
Product SKU
| |
---|---|
SYS-7044H-T | • SuperServer 7044H-T (Beige) |
SYS-7044H-TB | • SuperServer 7044H-TB (Black) |
Motherboard
| |
---|---|
Super X6DHT-G |
Processor/Cache
| |
---|---|
CPU | • Dual 604-pin FC-mPGA4 Sockets |
System Bus | • 800 MHz system bus |
OS Software | • Supports 64-bit Operating Systems • Supports 32-bit Operating Systems |
System Memory
| |
---|---|
Memory Capacity | • Eight 184-pin DIMM slots • Supports up to 16 GB DDR 333MHz memory, or • Supports up to 32 GB DDR 266MHz memory • Dual channel memory bus • Memory must be populated in pairs • Single-rank modules are recommended for 6+ DIMM support |
Memory Type |
• DDR 333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
DIMM Sizes | • 256 MB, 512 MB, 1GB, 2GB, 4GB** |
Memory Voltage | • 2.5 V only |
Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 Single Device Data Correction (SDDC) • Memory Sparing / Mirroring |
On-Board Devices
| |
---|---|
Chipset | • Intel® E7520 chipset |
SATA | • Marvell® 88SX6081 8-port SATA Controller |
SATA | • 6300ESB 2-port SATA Controller |
Zero Channel RAID |
• Support for Zero-Channel RAID |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 |
Network Controllers | • 2x Intel® 82541GI Single Port Gigabit Controller |
Graphics | • ATI Rage XL SVGA PCI video controller with 8MB of video memory |
Super I/O | • Winbond 83627HG chip |
Clock |
• CK409 |
Input/Output
| |
---|---|
Serial ATA | • Ten Serial ATA ports |
IDE | • Dual EIDE channels support up to four UDMA IDE devices |
Floppy | • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
ZCR | • Adaptec 2020SA (Card not included) |
LAN | • 2x RJ45 LAN ports |
USB | • 2x USB rear ports |
VGA | • 1x VGA Port |
Keyboard/Mouse | • PS/2 keyboard and mouse ports |
Serial Port/Header | • 2 Fast UART 16550 serial ports |
Parallel Port | • 1 ECP/EEP parallel port
|
Chassis
| |
---|---|
Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit (CSE-PT26) |
Model | • SC743T-650 |
Dimension and Weight
| |
---|---|
Height | • Tower: 17.2" (437mm) / Rackmount: 7.0" (178mm) |
Width | • Tower: 7.0" (178mm) / Rackmount: 17.2" (437mm) |
Depth | • 25.5" (648mm) |
Gross Weight | • 64.5 lbs (29.3kg) |
Available Color | • Beige / Black |
Front Panel
| |
---|---|
Buttons |
• Power On/Off button |
LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power Fail LED |
Ports | • 2x USB Ports |
Expansion Slots
| |
---|---|
PCI-Express |
• 2 (x8) slots |
PCI-X | • 1x 64-bit 133MHz PCI-X (3.3V) slot • 2x 64-bit 100MHz PCI-X (3.3V) slots |
PCI | • 1x 32-bit 33MHz PCI (5V) slot |
Drive Bays
| |
---|---|
Hot-swap |
• 8x 3.5"SATA Hot-swap Drive Bays |
Peripheral Bay(s) [90oRotatable] |
• 2x 5.25" Peripheral Drive Bay • 1x 5.25" Bay For Floppy Drive |
Peripheral Drives
| |
---|---|
Floppy |
• Panasonic 3.5" 1.44MB Floppy Drive |
SATA
| |
---|---|
• SATA Hard Drive Backplane |
System Cooling
| |
---|---|
Fans |
• 4x 5000 RPM Hot-swappable Cooling Fans |
Power Supply
| |
---|---|
650W Redundant-Cooling AC power supply with PFC [ 24-pin, (4-pin, 8-pin) = 12V ] | |
AC Voltage | • 100 - 240V, 47-63Hz, 11 Amp |
DC Output | • 5V + 3.3V ‰¤ 160W |
+5V | • 30.0 Amp |
+5V standby | • 4.0 Amp |
+12V | • 46.0 Amp |
-12V | • 0.6 Amp |
+3.3V | • 30.0 Amp |
PC Health Monitoring
| |
---|---|
CPU |
• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V & +5V Standby |
FAN | • Four 4-pin fan headers • Four 3-pin fan headers • 8x fans with status tachometer monitoring • Status monitor for speed control • Status monitor for on/off control • Low noise fan speed control • Support 3-pin fans • Pulse Width Modulated (PWM) fan connector |
Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • PC temperature sensing logic • Thermal Monitor 2 (TM2) support |
LED | • CPU / System Overheat LED • Suspend-state indicator LED |
Other Features | • Chassis intrusion detection • Chassis intrusion header • SDDC Support |
System Bios
| |
---|---|
Bios Type | • 8Mb Flash EEPROM with Phoenix® BIOS |
Bios Features | • Plug and Play (PnP) |