Supermicro 4U Rackmountable Tower SuperWorkstation SYS-7047A-T

Call for price

In stock

SKU

SYS-7047A-T

Key Features:
• Whisper Quiet Workstation (27dB)
• Dual socket R (LGA 2011) supports Intel® Xeon® processor
• Up to 1TB ECC DDR3; 16x DIMM slots
• 2x SATA3 and 8x SATA2 ports
• 8x 3.5" Hot-swap SATA HDD Bays
• 1200W High Efficiency Power Supply Platinum Level (94%)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Supermicro SuperWorkstation SYS-7047A-T

Product SKU
SuperWorkstation	• SYS-7047A-T (Black)

Motherboard
	• Super X9DAi

Processor/Cache
CPU	• Dual Socket R (LGA 2011) • Intel® Xeon® processor E5-2600 and E5-2600 v2 family
Cache	• Up to 30MB
System Bus	• QPI up to 8 GT/s
Note	BIOS version 3.0 or above is required

System Memory
Memory Capacity	• 16x 240-pin DDR3 DIMM slots • Up to 1TB DDR3 ECC LRDIMM • Up to 512GB DDR3 ECC Registered memory (RDIMM) • Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	• 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	• 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	• 1.5 V, 1.35 V
Error Detection	• Corrects single-bit errors • Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	• Intel® C602 Chipset
SATA	• SATA 2.0 3Gbps with RAID 0, 1, 5, 10 • SATA 3.0 6Gbps with RAID 0, 1
Network Controllers	• Intel® i350 Dual Port Gigabit Ethernet • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio	• RealTek ALC889 7.1 High Definition Audio with S/PDIF header
Super I/O	• Nuvoton W83627

Input/Output
SATA	• 2x SATA 3.0 ports (6Gbps) • 8x SATA 2.0 ports (3Gbps)
LAN	• 2x RJ45 Gigabit Ethernet LAN ports
USB	• 4x USB 3.0 ports (2 front + 2 rear) • 7x USB 2.0 ports (4 rear + 2 via header + 1 Type A)
Audio	• Line-in / Line-out / Microphone Ports
Keyboard/Mouse	• PS/2 Keyboard/Mouse port
Serial Port/Header	• 1x Fast UART 16550 ports
IEEE 1394a	• 2x Headers
TPM	• 20pin Header v1.2

System BIOS
BIOS Type	• 64Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	• Plug and Play (PnP) • APM 1.2 • DMI 2.3 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI

Chassis
Form Factor	• 4U Rackmountable / Tower • Optional Rackmount Kit
Model	• CSE-743TQ-1200B-SQ

Dimension and Weight
Height	• 17.8" (452mm)
Width	• 7" (178mm)
Depth	• 25.5" (648mm)
Gross Weight	• 71 lbs (32.2 kg)
Available Colors	• Black

Front Panel
Buttons	• Power On/Off button • System Reset button
LEDs	• Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED
Ports	• 2x front USB 3.0 Ports

Drive Bays
Hot-swap	• 8x 3.5" Hot-swap SATA Drive Trays
Peripheral Bay(s) [90o Rotatable]	• 2x 5.25" Peripheral Drive Bay • 1x 5.25" Bay for Floppy Drive

SAS / SATA Backplane
	• SAS / SATA Hard Drive Backplane w/AMI MG9072

System Cooling
Fans	• 2x 80mm PWM Super Quiet Fans • 1x 92mm PWM Super Quiet Rear Fan

Power Supply
	1200W high-efficiency power supply w/ PMBus
AC Input	• 1000W: 100-114.9 V, 50-60 Hz, 12 Amp • 1200W: 114.9-240 V, 50-60 Hz, 12-8 Amp
DC Output 1000W max 1200W max	• +3.3V / +5V / +12V / -12V / +5VSB • 20A / 20A / 83A / 0.3A / 3A • 20A / 20A / 99A / 0.3A / 3A
Note:	• Max. continuous combined load on +3.3V and +5V output shall not exceed 120W
Certification	• Platinum Certified

PC Health Monitoring
CPU	• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages • 6-Phase-switching voltage regulator
FAN	• Total of three fan headers supporting up to 8 fans • Three 4-pin fan headers • 3x fans with tachometer status monitoring • Support 3-pin fans (w/o speed control) • Low noise fan speed control (4-pin fan only)
Temperature	• Monitoring for CPU and chassis environment • Thermal Control for 8x fan connectors • PECI
Other Features	• Chassis intrusion detection • Chassis intrusion header

Operating Environment / Compliance
RoHS	• RoHS Compliant
Environmental Spec.	• Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing)