Supermicro 4U Rackmountable Tower A+ AMD Opteron Server AW-4021A-T2
Key Features:
• 2x Six-Core AMD Opteron„¢ 2000 processor
• Up to 64GB of memory
• 8 x 3.5" Hot-swap Drive Bays (up to 6 SATA)
• nVidia IO-55 Chipset
• Dual-port Gigabit LAN/Ethernet Controller
• 645W Low-Noise Power Supply
Product SKU
| |
---|---|
AW-4021A-T2 | • A+ Workstation 4021A-T2 (Beige) |
AW-4021A-T2B | • A+ Workstation 4021A-T2B (Black) |
Motherboard
| |
---|---|
• Super H8DAE-2 |
Processor/Chipset
|
|
---|---|
CPU | • Dual 1207-pin Socket F • Supports up to two Six-Core AMD Opteron„¢ 2000 Series (Socket F) processors • processors HT3.0 Link support |
Chipset | • nVidia MCP55 Pro • nVidia IO-55 • NEC uPD720400 |
System Memory
| |
---|---|
Memory Capacity | • 8x 240-pin DIMM sockets support up to
64GB DDR2 800/667/533/400 MHz SDRAM • Single or Dual (recommended) channel memory support • For Single CPU: Memory must be populated in CPU1 DIMMs only • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
Memory Type | • DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
Memory Voltage | • 1.8V only |
Error Detection | • Corrects single-bit errors |
On-Board Devices
| SATA | • nVidia MCP55 Pro SATA2 3.0Gbps Controller • 6 SATA Ports • nVidia RAID 2.0 • SATA RAID 0, 1, 0+1, 5, JBOD Support |
IPMI | • Intelligent Platform Management Interface v.2.0, Low Profile • RMM (Remote Management Module) • (Optional: AOC-SIMLP-B(+) R 3.00) • (Optional: AOC-SIMLP-3(+) R 3.00) with 3rd LAN support • NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot • (Card not included) |
---|---|
Network Controllers | • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Super I/O | • Winbond 83627HF |
Audio |
• HD Audio 7.1 Sound |
Expansion Slots
| PCI-Express | • 2 x16 PCI-e Slots • 1 x8 PCI-e Slot • 1 x4 PCI-e Slot |
PCI-X | • 1 64-bit 133MHz PCI-X (3.3V) slots • 1 64-bit 100MHz PCI-X (3.3V) slot |
---|
Input/Output
| SATA | • 6 SATA2 ports | IDE | • Single EIDE channel support up to two UDMA IDE devices • Supports UDMA Mode 5 • Supports PIO Mode 4 • Supports ATA 100/133 |
Floppy | • 1 Floppy port; 1.44 MB support | LAN | • 2 RJ45 LAN ports |
---|---|
USB | • FUCI • Up to 8 USB Ports 2.0 Compliant • 4 Rear Ports • 4 Internal Headers |
Keyboard/Mouse | • PS/2 keyboard and mouse ports |
Serial Ports | • 2 Fast UART 16550 serial ports |
Parallel Port | • 1 ECP / EPP parallel port |
Audio | • 1 Line In / Line Out / Microphone port • 3 Audio Jacks for 7.1 Sound |
Firewire |
• 2x 1394 internal headers |
Chassis
| |
---|---|
Form Factor | • Tower / 4U Rackmountable • Optional Rackmount Kit (CSE-PT26) |
Model | • SC743T-645 |
Dimension and Weight
| |
---|---|
Height | • 7.0" (178mm) |
Width | • 17.2" (437mm) |
Depth | • 25.5" (648mm) |
Gross Weight | • 63 lbs (28.6kg) |
Available Colors | • Beige, Black |
Front Panel
| |
---|---|
Buttons | • Power On/Off button |
LEDs |
• Power LED |
Ports | • 2x USB Ports (2.0 Ready) |
Drive Bays
| |
---|---|
Hot-swap | • 8 x 3.5" SATA Hot-swap Drive Bays |
Peripheral Bay(s) [90o Rotatable] |
• 2x 5.25" Peripheral Drive Bay |
SATA Backplane
| |
---|---|
• SATA Hard Drive Backplane w/ Enclosure Management (SGPIO) |
System Cooling
| |
---|---|
Fans | • 4x 5000 RPM Hot-swappable PWM Cooling Fans |
Power Supply
| |
---|---|
645W Low-Noise AC power supply with PFC [ 24-pin, (4-pin, 8-pin) = 12V ] | |
AC Voltage | • 100 - 240V, 50/60Hz, 11-5.5 Amp |
Dimension
(DC Output |
• 5V + 3.3V ‰¤ 160W |
+5V | • 30.0 amp |
+5V standby | • 4.0 amp |
+12V | • 46.0 amp |
-12V | • 0.6 amp |
+3.3V | • 30.0 amp |
PC Health Monitoring
| |
---|---|
CPU | • Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT |
FAN | • Total up to 8-fan status tachometer monitoring • Up to eight 4-pin fan headers • Status monitor for speed control • Stauts monitor for on/off control • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • CPU Thermal Trip Support • Thermal Control for 8x Fan Connectors • I2C Temperature Sensing Logic |
LED | • CPU / System Overheat LED • Suspend-State Indicator LED • +5V Standby Alert LED |
Other Features | • Chassis Intrusion Detection • Chassis Intrusion Header |
System BIOS
| |
---|---|
BIOS Type |
• 8Mb Flash EEPROM with AMI® BIOS |
BIOS Features |
• Plug and Play (PnP) • DMI 2.3 • PCI 2.2 • ACPI 2.0 • BIOS Rescue Hot Keys • USB Keyboard Support • Hardware BIOS Virus Protection • SMBIOS 2.3 |