Supermicro 4U Rackmountable Tower A+ AMD Opteron Server AS-4021M-82R+B
Key Features:
• 2x Six-Core AMD Opteron„¢ 2000 processor
• Up to 128GB of memory
• nVidia MCP55 Pro / NEC uPD720400 Chipset
• 8x 3.5" Hot-swap U320 SCSI Drive Bays
• Dual-port Gigabit LAN/Ethernet Controller
• 800W Redundant Power Supply
Product SKU
| |
---|---|
AS-4021M-82R+ | • A+ Server 4021M-82R+ (Beige) |
AS-4021M-82R+B | • A+ Server 4021M-82R+B (Black) |
Motherboard
| |
---|---|
• Super H8DM8-2 |
Processor/Chipset
|
|
---|---|
CPU | • Dual 1207-pin Socket F • Supports up to two Six-Core AMD Opteron„¢ 2000 Series (Socket F) processors • HT3.0 Link support |
Chipset | • nVidia MCP55 Pro • NEC uPD720400 |
System Memory
| |
---|---|
Memory Capacity | • 16x 240-pin DIMM sockets support up to
128GB DDR2 800/667/533/400 SDRAM * • For Single CPU: Memory must be populated in CPU1 DIMMs only • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks • Dual channel memory bus |
Memory Type | • DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
Memory Voltage | • 1.8V only |
On-Board Devices
| SCSI | • Adaptec AIC-7902W Controller • Dual-Channel Ultra320 SCSI with Host RAID • Host RAID 0, 1, 10, JBOD |
Zero Channel RAID | • Support for Zero-Channel RAID • Optional: (Card not included) |
IPMI | • Intelligent Platform Management Interface v.2.0, Low Profile • (Optional: AOC-SIMLC R 3.00) • (Optional: AOC-SIM1U+ R 3.00) • RMM (Remote Management Module) • (Card not included) |
---|---|
Network Controllers | • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
VGA | • ATI ES1000 Graphics Controller |
Super I/O | • Winbond 83627HF |
Input/Output
| IDE | • Single EIDE channel support up to two UDMA IDE devices • Supports UDMA Mode 5 • Supports PIO Mode 4 • Supports ATA 100/133 |
Floppy | • 1 Floppy port; 1.44 MB support | LAN | • 2 RJ45 LAN ports |
---|---|
USB | • FUCI • Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible • 2 Rear Ports • 4 Internal Headers |
VGA | • 1 VGA port |
Keyboard/Mouse | • PS/2 keyboard and mouse ports |
Serial Ports | • 1 Fast UART 16550 serial port • 1 serial port header |
System BIOS
| |
---|---|
BIOS Type | • 8Mb Flash EEPROM with AMI® BIOS |
BIOS Features |
• Plug and Play (PnP) |
Chassis
| |
---|---|
Form Factor | • Tower / 4U Rackmountable • Optional Rackmount Kit (CSE-PT26) |
Model | • SC745S2-R800 |
Dimension and Weight
| |
---|---|
Height | • 7.0" (178mm) |
Width | • 17.2" (437mm) |
Depth | • 25.5" (648mm) |
Gross Weight | • N.A. |
Available Colors | • Beige, Black |
Front Panel
| |
---|---|
Buttons | • Power On/Off button |
LEDs |
• Power LED |
Ports | • 2x USB Ports |
Drive Bays
| |
---|---|
Hot-swap | • 8 x 3.5" Hot-swap (U320 SCSI) Drive Bays |
M.2 |
• 2x 5.25" Peripheral Drive Bay |
Expansion Slots
| |
---|---|
PCI-Express | • 2 x8 PCI-e slots |
PCI-X |
• 2 64-bit 133/100MHz PCI-X (3.3V) slots |
IPMI | • IPMI 2.0 expansion slot |
Backplane
| |
---|---|
• 1x SCSI Hard Drive Backplane |
System Cooling
| |
---|---|
Fans | • 3x 5000 RPM Hot-Swappable Cooling Fans |
Shroud |
• 1x Air Shroud |
Power Supply and Distributor
| |
---|---|
800W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | |
AC Voltage | • 100 - 240V, 50-60Hz, 10-4 Amp |
+5V standby |
• 4 Amp |
+12V | • 66 Amp |
With Power Distributor |
• +5V: 30 Amp • +3.3V: 24 Amp • -12V: 0.6 Amp |
PC Health Monitoring
| |
---|---|
CPU | • Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT |
FAN | • Total up to 8-fan status tachometer monitoring • Up to eight 4-pin fan headers • Status monitor for speed control • Stauts monitor for on/off control • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • CPU Thermal Trip Support • Thermal Control for 8x Fan Connectors • I2C Temperature Sensing Logic |
LED | • CPU / System Overheat LED • Suspend-State Indicator LED • +5V Standby Alert LED |
Other Features | • Chassis Intrusion Detection • Chassis Intrusion Header |