Supermicro 4U Rackmountable SuperServer SYS-4027GR-TR

Call for price
In stock
SKU
SYS-4027GR-TR

Key Features:
• 8x GPUs in 4U
• Dual socket R (LGA 2011) supports Intel® Xeon® processor
• Up to 1.5TB ECC DDR3; 24x DIMM slots
• Intel® i350 Dual port GbE LAN
• 24x 2.5" Hot-swap SAS2/SATA3 HDD Bays
• 1600W Redundant Power Supplies Platinum Level (94%+)

Supermicro SuperServer SYS-4027GR-TR

Product SKU
• SuperServer 4027GR-TR (Black)
Motherboard
  • Super X9DRG-OF-CPU
Processor/Cache
CPU • Intel® Xeon® processor E5-2600 and E5-2600 v2 family  (up to 150W TDP **)
• Dual Socket R (LGA 2011)
Cache • Up to 30MB
System Bus • QPI up to 8 GT/s
    BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
GPU/Xeon Phi
Support
• K80, up to 150W CPU at 30°C
• K40 (Atlas), up to 150W CPU at 30°C
• K10/K20/K20X/K1/K2 (Kepler), up to 150W CPU at 30°C
• Xeon Phi, up to 150W CPU at 30°C
System Memory
Memory Capacity • 24x 240-pin DDR3 DIMM slots
• Up to 1.5TB DDR3 ECC LRDIMM
• Up to 768GB DDR3 ECC RDIMM
• Up to 192GB DDR3 ECC/non-ECC UDIMM
Memory Type

• 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
• Support ECC and non-ECC UDIMMs

DIMM Sizes

• 32GB, 16GB, 8GB, 4GB, 2GB, 1GB

Memory Voltage

• 1.5 V, 1.35 V

Efrror Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset • Intel® C602 chipset
AHCI SATA • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
• SATA 3.0 6Gbps with RAID 0, 1
SCU SATA • SATA 2.0 3Gbps with RAID 0, 1, 10
IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Nuvoton WPCM450 BMC

Network Controllers

• Intel® i350 Dual port GbE LAN
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10Base-T , 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

• Matrox G200 (Nuvoton WPCM450 BMC)

Super I/O

• Nuvoton W83527HG

Input/Output
AHCI SATA • 2x SATA 3.0 ports (6Gbps)
• 4x SATA 2.0 ports (3Gbps)
SCU SATA • 4x SATA 2.0 ports (3Gbps)
LAN • 2x RJ45 10GBase-T ports
• 1x dedicated LAN port for IPMI
USB • 9x USB 2.0 ports total (4x rear + 4x via header + 1x Type A)
Serial Port/Header • 1x Fast UART 16550 ports: 1 header
System BIOS
BIOS Type • 16MB SPI Flash EEPROM with AMI® BIOS
BIOS Features • Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support
Chassis
Form Factor • 4U Rackmountable
• Rackmount Kit (MCP-290-00057-0N)
Model CSE-418GTS-R3200B
Dimension and Weight
Height • 7.0" (178mm)
Width • 17.2" (437mm)
Depth • 29" (737mm)
Gross Weight • 135 lbs (61.2 kg)
Available Colors • Black
Drive Bays
Hot-swap

• 24x 2.5" Hard drive bays

Expansion Slots
PCI-Express

• 8x PCI-E 3.0 x16 (double-width) slots
• 2x PCI-E 3.0 x8 (in x16) slot
• 1x PCI-E 2.0 x4 (in x16) slot

Backplane
 

• SAS/SATA HDD Backplane

System Cooling
Fans

• 8x 92mm RPM Hot-Swappable Cooling Fans

Shrouds

• 1x Air Shroud (MCP-310-84806-0B)
• 1x Air Shroud (MCP-310-84807-0B)

Power Supply
  1600W 1U Redundant Power Supplies with PMBus
Total Output Power • 1000W/1600W
Dimension
(W x H x L)
• 73.5 x 40 x 265 mm
Input • 100-127Vac / 12.9A Max / 50-60Hz
• 200-240Vac / 9.5A Max / 50-60Hz
+12V • Max: 82A / Min: 0.1A (100-127Vac)
• Max: 132A / Min: 0.1A (200-240Vac)
12V SB • Max: 2A / Min: 0.2A
Output Type • 25 Pairs Gold Finger Connector
Certification • Platinum Level
PC Health Monitoring
CPU

• Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages
• Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. ## 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V

FAN

• 4-pin fan headers with tachometer status monitoring
• Low noise fan speed control mode

Temperature

• Monitoring for CPU and system environment
• Thermal Control for 8x fan connectors

Other Features

• Chassis intrusion detection

Operating Environment
RoHS

• RoHS Compliant

Environmental Spec.









• Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)






Copyright © 2014-present Will Jaya Inc. All rights reserved.