Supermicro 4U Rackmount Tower SuperServer SYS-8048B-TR3F
Key Features:
• Quad socket R1 (LGA 2011) supports Intel® Xeon® processor
• Up to 2TB DDR3 (64GB LRDIMM); 32x DIMM slots
• 2x PCI-E 3.0 x16 FH slot; 2x PCI-E 3.0 x8 FH slot
• Intel® i350 Dual port GbE LAN
• 5x 3.5" Hot-swap SATA Drive Bays
• 3x 9cm + 3x 8cm Heavy Duty fans with speed control
• 1400W Redundant Digital PS Platinum Level (95%)
Product SKU
| |
---|---|
SYS-8048B-TR3F | • SuperServer 8048B-TR3F (Black) |
Motherboard
| |
---|---|
• Super X10QBL |
Processor/Cache
|
|
---|---|
CPU | • Intel® Xeon® processor E7-8800 v4/v3*, E7-4800 v4/v3* family (up to 24 Cores and 165W TDP) • Quad Socket R1 (LGA 2011) |
Cache | • Up to 60 MB |
System Bus | • QPI up to 9.6 GT/s |
Note | • E7-48XX/88XX v4/v3 family or above requires Rev. 2.0x or above motherboard w/ Jordan Creek II |
System Memory
| |
---|---|
Memory Capacity | • 32x 240-pin DDR3 DIMM slots • Supports up to 2TB DDR3, ECC Registered memory (RDIMM/LRDIMM) in 32 DIMM slots |
Memory Type | • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 64GB, 32GB, 16GB, 8GB, 4GB |
Memory Voltage | • 1.5 V, 1.35 V |
Error Detection |
• Corrects single-bit errors |
On-Board Devices
| Chipset | • Intel® C602J chipset |
---|---|
SATA | • SATA2 (3Gbps) with RAID 0, 1, 5, 10 • SATA3 (6Gbps) with RAID 0, 1 |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
Network Controllers | • Intel® i350 Dual port GbE LAN |
Graphics |
• ASPEED 2400 |
Input/Output
| SATA | • 2x SATA3 (6Gbps) ports • 4x SATA2 (3Gbps) ports |
LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x dedicated LAN port for IPMI on AOM |
USB | • 3x USB 2.0 rear ports |
---|---|
Serial Port/Header | • 2x Fast UART 16550 ports: 1 rear and 1 header |
DOM | • 2x DOM (Disk on Module) power connectors |
System BIOS
| BIOS Type | • 16MB SPI Flash EEPROM with AMI® BIOS | BIOS Features | • Plug and Play (PnP) • PCI 2.2 • ACPI up to 3.0 • USB Keyboard support |
---|
Chassis
| |
---|---|
Form Factor | • 4U Rackmount/Tower |
Model | • CSE-748TQ-R1K43B |
Dimension and Weight
| |
---|---|
Height | • 18.2" (462mm) |
Width | • 7.0" (178mm) |
Depth | • 28.4" (721mm) |
Gross Weight | • 86.0 lbs (39.0 kg) |
Available Colors | • Black |
Drive Bays
| |
---|---|
Hot-swap |
• 5x 3.5" Hot-swap Drive Bays |
Expansion Slots
| |
---|---|
PCI-Express |
• 2x PCI-E 3.0 x16 Full-heigh slot |
Backplane
| |
---|---|
• SAS/SATA HDD Backplane |
System Cooling
| |
---|---|
Fans | • 3x 9cm Heavy Duty fans with speed controlCooling Fans |
Shrouds |
• 1x Air Shroud (MCP-310-74806-0B) |
Power Supply
| |
---|---|
Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 | |
AC Voltage | • 100-240 V, 50-60 Hz, 15 Amp max |
+12V |
• 100 Amp/115 Vac • 117 Amp/230 Vac |
With Power Distributor |
• +5V: 30 Amp • +3.3V: 25 Amp • -12V: 0.6 Amp |
Certification | • Platinum Certified |
PC Health Monitoring
| |
---|---|
CPU |
• Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages |
FAN | • 4-pin fan headers with tachometer status monitoring |
Temperature | • Monitoring for CPU and system environment |
Other Features | • Chassis intrusion detection |
Operating Environment
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. |
• Operating Temperature:
10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |