Supermicro 4U Rackmount SuperServer SYS-F618R3-FTPT+
Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor
• Up to 2TB ECC 3DS LRDIMM; 16x DIMM slots
• 2x 3.5" fixed drives
• 1x PCI-E 3.0 x8, 1x PCI-E 2.0 x4, or 2x PCI-E 3.0 x8 (optional)
• I/O ports: 2 10GBase-T, 1 Built-in video, 2 USB 3.0 ports
• 2000W Redundant Power Supplies Titanium Level (96%)
Product SKU
| |
---|---|
SYS-F618R3-FTPT+ | • SuperServer F618R3-FTPT+ (Black) |
Motherboard
| |
---|---|
• Super X10DRFF-ITG |
Processor/Cache
|
|
---|---|
CPU | • Intel® Xeon® processor E5-2600 v4 / v3 family (up to 145W TDP) • Dual Socket R3 (LGA 2011) |
Cores/Cache | • Up to 22 Cores / Up to 55MB Cache |
System Bus | • QPI up to 9.6 GT/s |
BIOS version 2.0 or above is required | |
Note | • Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory
| |
---|---|
Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type | • 2400 /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB |
Memory Voltage | • 1.2 V |
Error Detection |
• Corrects single-bit errors |
On-Board Devices
| Chipset | • Intel® C612 chipset |
---|---|
SATA | • SATA3 (6Gbps) with RAID 0, 1 |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
Network Controllers | • Intel® X540 Dual Port 10GBase-T |
Graphics |
• ASPEED AST2400 BMC |
Input/Output (per node)
| SATA | • 10x SATA3 (6Gbps) ports | LAN | • 10x SATA3 (6Gbps) ports
LAN 2x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port |
USB | • 2x USB 3.0 ports |
---|---|
VGA | • 1x VGA port |
System Bios
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
---|---|
BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
Chassis
| |
---|---|
Form Factor | • 4U Rackmount |
Model | • CSE-F418IF2-R2K04BP |
Dimension and Weight
| |
---|---|
Width | • 17.63" (448mm) |
Height | • 6.96" (177mm) |
Depth | • 29" (737mm) |
Gross Weight | • 200 lbs (90.72 kg) |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons |
• Power On/Off button |
LEDs | •
Power status LED • 2x Network activity LEDs |
Expansion Slots (per node)
| |
---|---|
PCI-Express |
• 1x PCI-E 3.0 x8, 1x PCI-E 2.0 x4, or 2x PCI-E 3.0 x8 (optional) |
Drive Bays (per node)
| |
---|---|
Fixed |
• 2x 3.5" fixed drives |
System Cooling
| |
---|---|
Fans |
• 8x 8cm 9.5k RPM Rear fans |
Power Supply (76mm Width)
| |
---|---|
2000W Redundant Power Supplies with PMBus | |
Total Output Power | • 1000W/1800W/1980W/2000W |
Dimension
(W x H x L) |
• 76 x 40 x 336 mm |
Input | • 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
• 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz • 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz • 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz • 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only) |
+12V | • Max: 83.3A / Min: 0A (100-127 Vac) • Max: 150A / Min: 0A (200-220 Vac) • Max: 165A / Min: 0A (220-230 Vac) • Max: 166.7A / Min: 0A (230-240 Vac) • Max: 166.7A / Min: 0A (200-240 Vac) (UL/cUL only) |
+5Vsb | • Max: 1A / Min: 0A |
Output Type | • 27 Pairs Gold Finger Connector |
Certification | • Titanium Level |
Operating Environment
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. |
• Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |